Clutch Parts

3-Piece Chinese Clutch Disk Plate SetThis clutch disc set fits a wide variety of atvs, dirt bikes, etc. with automatic clutches.  The plate with the external teeth has friction material on both sides.  The two plates with internal teeth, have friction material only on one side.Specs:OD of plate with external teeth: 96mm [3.78"] Does not include tee..

Chinese Clutch Top Cover for ATVs, Dirt-Bikes & Go Karts.This Chinese clutch top cover is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts. This fits the semi-auto clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover description:Clutch topMounting hole distance: 42mm [1.65"]Center hole diameter: 10mm [..

Chinese Clutch Top Cover Plate Gasket for ATVs, Scooters, Dirt-Bikes & Go Karts.This Chinese clutch top cover plate gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the semi-auto clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover description:Clutch top plate gask..

Chinese Clutch Top Cover Screws - Set of 4 - 50cc to 125cc Engine.This Chinese clutch top cover screws for the plate cover - replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This gasket fits clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover screws description:Set of 4Compatible with 50cc-125cc ..

Chinese Clutch Gear Shift Pin Bolt - 4mm - 50cc-110ccGear Shift Pin Bolt details:Overall length: 39.4mmEnd measurement: 10mm x 1.50mm x 14.6mm long10mm end has 3.75mm hole in the endEnd measurement:  8mm x 1.25 x 20mm long8mm end has slot - hole located on the smooth area of boltCenter lip thickness: 4mm50-135cc engines..

Chinese Clutch Gear Shift Pin Bolt - 5mm - 50cc-110ccGear Shift Pin Bolt details:Overall length: 40mmEnd measurement: 10mm x 1.50mm x 15mm long10mm end has 3mm hole in the endEnd measurement:  8mm x 1.25 x 20mm long8mm end has slot - hole located on the smooth area of bolt Center lip thickness: 5mm50-135cc engines..

Chinese Clutch Gear Shift Spring - 21mm - 50cc-110ccGear Shift Spring details:OD: 21mmID: 18.4mmHeight: 6.3mm50-135cc engines..

Clutch Lock NutThis is the "pesky" clutch lock nut that causes all the problems when trying to replace your clutch. We have the tool you need to remove this nut but if you have already damaged your lock nut, we have the replacement lock nut with washer too.Lock nut details:Nut ID: 14mmNut OD: 27.85mm [1.10"]Comes with retaining washerRequires spec..

Chinese Clutch Primary Drive Gear with Inner Sleeve - 17 Teeth - 50cc-125ccDrive Gear details:17 Teeth Drive GearWill NOT for 18T drive gearsPopular in 50-125cc semi-auto enginesSome full-autos may use this drive gearInner sleeve includedKnown to fit all Kazuma 100cc & 110cc semi-auto ATVs & dirt bikes. [Falcon, Lacoste, Panda]**MACHINED FO..

Starter Drive Clutch - 3 Sprag - 50cc to 125cc EngineEngine Starter Clutch - 3 sprags is the replacement part that fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc ATVs, Dirt Bikes.  This E22 cloned engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire,..

Starter Clutch Drive Gear50cc to 125cc EngineEngine Starter Clutch Drive Gear - AKA primary driven gear / clutch counter gear.  This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Drive Gear details:69 ..

Starter One Way Drive Clutch Gear50cc to 125cc EngineEngine Starter Clutch Gear - This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Gear details:41 tooth gearID of center hole: 19.5mm [.77"] Overall G..

Chinese ATV Starter Clutch AssemblyGY6 250cc EngineEngine Starter Clutch Assembly - GY6 250cc - Dirt Bikes, Scooters. This style engine is identified by the CVT belt cover on the left side of engine. This Honda Elite copied scooter engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, J..

Starter Clutch - 20 Sprag - CG200 CG250 EngineEngine Starter Clutch - 20 sprags is the replacement part that fits CG 150cc 200cc, 250cc ATVs, Dirt Bikes. This vertical style engine with a manual clutch and foot shifter for the gears. This dirt bike engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, R..

Chinese ATV Starter Clutch - 3 Sprag - CG200 CG250 EngineEngine Starter Clutch / Overrunning Starter Bypass / One Way Starter Clutch - Three sprags is the replacement part that fits 150cc, 200cc, 250cc ATVs, Dirt Bikes. This vertical style engine with a manual clutch and foot shifter for the gears. This dirt bike engine commonly used in Roketa, Lif..

Dual Size Clutch Nut Spanner ToolThis specialty tool will make removal of those clutch nuts fast and easy! This dual size tool is especially handy for those steel stamped clutches with the smaller nut. Uses a 1/2 drive extension to attach to your impact wrench or your ratchet.Tool height: 60mm [2.36"]Small end width:  25mm [1"]Large end width: 30mm..

Deep Well Starter Clutch Nut Spanner ToolGY6-150 spanner toolThis specialty tool is for removing the 4 notched nut holding on the starter clutch on the GY6 150cc engine. This nut looks like a clutch nut used on the 50cc-110cc engines, however it is larger style nut. This nut has reverse threads and removes in the clockwise direction.Uses a 1/2 driv..

Chinese Clutch Flange Nut - Hisun Primary and Secondary 16mm x 1.0 This 16mm x 1.0 flange nut works with both the primary and secondary clutches on Hisun 400cc, 500cc and 700cc UTVs.  Known to fit Bennche, Big Muddy, Coleman, HiSun, Massimo, Menards, Supermach, Q-Link and more!  Please compare pictures and measurements...

Chinese Starter Clutch AssemblyGY6 125cc 150cc EngineEngine Starter Clutch Assembly - GY6 125cc and 150cc ATVs, Dirt Bikes, Scooters. This style engine is identified by the CVT belt cover on the left side of engine. This air cooled scooter engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi..

Chinese Starter Clutch Lock NutVersion 2This starter clutch nut is used on the GY6 150cc engine.  It may require a special tool to remove from the engine to avoid damaging the nut.  Please use the measurements and pictures to help you match the parts you are needing.Lock nut details:ID: 21mm [.82"]OD: 30.9mm [1.22"]4 notchesReverse threadedAlso kno..

Jackshaft Assembly for Massimo MB200 Mini BikesThis jackshaft assembly for the Massimo MB200 mini bike is what the clutch assembly and front chain sprockets all attach to.  Jackshaft details:Overall dimensions: 9.8" x 4.1" plate only(4) arms with M6*1.00 bolt holesIncludes chain tensionerIncludes chain tensioner springIncludes jackshaftIncludes (2)..

Jackshaft for Massimo MB200 Mini BikeJackshaft details:Length: 131mm [5.15"]Head is squared off on two sides16mm threadsKey slot33220563-1  MB200-239Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be offered for you. Professional Safety Packaging and ..

KG Clutch Factory - High Performance Clutch 5 Disc Plate Set - 100cc - 250cc - [KG068-5HPK]Details:KG's full line of products is designed to provide riders with the highest quality, best performance and longest life in race and daily applicationsPro Friction Discs use specially blended cork-based materials that are designed and manufactured to meet..

KG Clutch Factory - High Performance Clutch 6 Disc Plate Set - 100cc - 250cc - [KG068-6HPK]Details:KG's full line of products is designed to provide riders with the highest quality, best performance and longest life in race and daily applicationsPro Friction Discs use specially blended cork-based materials that are designed and manufactured to meet..

KG Clutch Factory - High Performance Clutch 3 Disc Plate Set - 50cc - 135cc - [KG146-3HPK]Details:KG's full line of products is designed to provide riders with the highest quality, best performance and longest life in race and daily applicationsPro Friction Discs use specially blended cork-based materials that are designed and manufactured to meet ..

KG Powersports - Clutch Factory High Performance Clutch Spring Set - [KGS-044]Details:Made In USAOverall length:  Approx. 25.5mmOD of spring: 16mmID of spring: 12mmSet of 6KG's full line of products is designed to provide riders with the highest quality, best performance and longest life in race and daily applicationsPro Friction Discs use speciall..

One Way Starter Clutch Sprag Gear 64 ToothVersion 2One Way Starter Clutch 3-Sprag Gear with 64 Teeth Sprag gear assembly details:64 tooth gearID of center hole: 21.8mm [.85"]OD of gear: 115mm [4.5"]OD of bearing: 88mm [3.5"]3 spragsStamped "KYMCO GY6"This style starter clutch has the three (3) locking one-way pawls. PLEASE CHECK YOUR MEASUREMENTS B..

Motion Pro Counter Balancer Tool - Clutch Hub Spanner - 20MM - [3803-0016]This specialty tool will make removal of those clutch nuts fast and easy! Fits the clutch nuts found on most 50cc through 250cc Chinese/Honda Copy engines. Replaces 20mm end of Honda OEM tool 07716-0020100Used to remove Honda OEM nut 90231-KY4-9004-pin spanner made of heat-tr..

One Way Starter Clutch Sprag GearVersion 4One Way Starter Clutch Sprag Gear - 200cc-250cc - ATVs and dirt bikes  Note the gear thickness.  If yours is 7mm thick you need our Version 5.Sprag gear assembly details:Sprocket thickness: 5mmID of center hole: 21.8mm [.85"]Overall OD: 117mm [4.6"]Hole distance: 63.5mm [2.5"] holes center-to-center8mm thre..

One Way Starter Clutch Sprag GearVersion 5One Way Starter Clutch Sprag Gear - 200cc-250cc - ATVs, Dirt Bikes, Scooters. Note the gear thickness.  If yours is 5mm thick you need our Version 4.Sprag gear assembly details:Sprocket thickness: 7mmID of center hole: 21.8mm [.85"]Overall OD: 117mm [4.6"]Hole distance: 63.5mm [2.5"] holes center-to-center8..

Chinese Starter Clutch AssemblyMinarelli / Eton EngineEngine Starter Clutch Assembly for Minarelli engine.  Used on several makes and models of ATVs and UTVs.  These come with either 15 or 17 teeth in the middle hole.  This is the 15 tooth version.Starter Clutch assembly details:ID of center hole: 16mm [.62"]Center hole teeth: 15 tooth Overall OD: ..

One Way Starter Clutch Sprag Gear for BMW F650, G650 MotorcyclesVersion 9One Way Starter Clutch Sprag Gear - ATVs, Dirt Bikes, Scooters. Sprag gear assembly details:ID of center hole: 34.1mm [1.34"]Overall OD: 140mm [5.5"]20 sprags/pawls61 tooth gear(3) sets of threaded holes... each set is 50mm center-to-center from each otherHardened steelThis st..