All Clutch Assemblies

Chinese ATV Centrifugal Clutch Assembly2 Stroke - 47-49ccPocket BikeThis is the clutch assembly for pocket bikes with a 2-stroke 47-49cc engine.  Please use the pictures and specs to help match the clutch to your application.Clutch drum details:OD: 82mm [3.22"]ID: 77.7mm [3.05"]8mm*1.25 threadsClutch shoe specs:2 pads2 springs10mm hole in each pad..

Chinese ATV Clutch Shoe Assembly2 Stroke - 47-49ccPocket BikeThis is the clutch shoe assembly for pocket bikes with a 2-stroke 47-49cc engine.  Please use the pictures and specs to help match the clutch shoes to your application.Assembly details:Center hole diameter: 11.45mm [.45"] tapering up to 14mm [.55"] Overall diameter: 76mm [3"]Shoe width: ..

Chinese Clutch Assembly2 Stroke - 47-49ccPocket BikeThis is the clutch assembly for pocket bikes with a 2-stroke 47-49cc engine.  Please use the pictures and specs to help match the clutch to your application.Assembly details:Comes with shoe assemblyCenter hole of shoe assembly diameter: 11.5mm [.45"]Overall diameter of box: 11.35cm [4.47"] diagon..

Chinese Clutch Assembly2 Stroke - 47-49ccPocket BikeThis is the clutch assembly for pocket bikes with a 2-stroke 47-49cc engine.  Please use the pictures and specs to help match the clutch to your application.Assembly details:Comes with shoe assemblyCenter hole of shoe assembly diameter: 12.9mm [.50"]Overall diameter of box: 11.35cm [4.47"] diagon..

Chinese Clutch Assembly - 15 Spline - Minarelli 49cc 50cc 2-strokeVersion 15Clutch assembly is a replacement clutch for 49cc 2-stroke Chinese manufactured brands and models. Popular in mopeds & scooters.  Clutch details:15 splines inside the clutch drum/bell12mm ID on bell at splinesOD of drum: 112mm [4.4"]ID of drum: 105mm [4.2"]Two shoesPulle..

Chinese Clutch Assy - 16 Spline - Minarelli 49cc 50cc 2-strokeVersion 16Clutch assembly (#16) is replacement clutch for 49cc 2-stroke Chinese manufactured brands and models. Popular in mopeds & scooters.  Clutch details:16 splines inside the clutch drum/bell12mm ID on bell at splinesOD of drum: 112mm [4.4"]ID of drum: 105mm [4.2"]Two shoesPulle..

Chinese Clutch - Minarelli 49cc 50cc 2-Stroke  Version 17Clutch assembly (#17) is replacement clutch for 49cc 2-stroke Chinese manufactured brands and models. Popular in Taiwan manufactured mopeds & scooters.  Clutch details:16 splines inside the clutch drum/bell12mm ID on bell at splines6901 bearing in clutch shoe plateOD of bell housing: 119m..

20 Series Torque Converter 6" Driven Pulley Assembly - 3/4" Bore  This 20 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 3/4" shafts.  It fits 3hp-8hp engines with 3/4" horizontal shafts.Driven clutch details:Overall OD of pulley: 157mm [6.2"]Symmetrical belt3/4" Bore3/16 key wayReplaces Comet and Manc..

20 Series Torque Converter 6" Driven Pulley Assembly - 5/8" Bore  This 20 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 5/8"" shafts.  It fits 3hp-8hp engines with horizontal shafts.Driven clutch details:Overall OD of pulley: 157mm [6.2"]Symmetrical belt5/8" Bore3/16" key wayReplaces Comet and Manco21..

20 Series Torque Converter 7" Driven Pulley Assembly - 3/4" Bore  This 20 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 3/4" shafts.  It fits 3hp-8hp engines with 3/4" horizontal shafts.Driven clutch details:Overall OD of pulley: 183mm [7.2"]Symmetrical belt3/4" Bore3/16 key wayReplaces Comet and Manc..

20 Series Torque Converter 7" Driven Pulley Assembly - 5/8" Bore  This 20 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 5/8" shafts.  It fits 3hp-8hp engines with horizontal shafts.Driven clutch details:Overall OD of pulley: 183mm [7.2"]Symmetrical belt5/8" Bore3/16 key wayReplaces Comet and Manco2194..

Torque Converter Clutch Driver Assembly - 20 Series 3/4" Bore for Go Karts and Mini BikesTorque converter driver clutch for Go Karts and mini bikes.  It's also used on lawn mowers, generators and more.  Please check specs before ordering.Driver clutch details:Overall OD of pulley: 116mm [4.6"]Overall OD of bell: 124mm [4.9"]3/4" BoreUses a 3/4" top..

30 Series Torque Converter 6" Driven Pulley Assembly - 3/4" Bore  This 30 series 6" driven clutch pulley assembly is used on atvs, utvs and Go Karts with 3/4" shafts.  Driven clutch details:Overall OD of pulley: 157mm [6.2"]Asymmetric3/4" Bore3/16" key wayRed tension springReplaces Comet and Manco219465AKnown to fit 8hp-18hp engines with 3/4" horiz..

30 Series Torque Converter 6" Driven Pulley Assembly - 5/8" Bore  This 30 series 6" driven clutch pulley assembly is used on atvs, utvs and Go Karts with 5/8" shafts.  Driven clutch details:Overall OD of pulley: 157mm [6.2"]Asymmetric5/8" Bore3/16" key wayRed tension springReplaces Comet and Manco219456AASW 147069500010080G0009.500.001Known to fit ..

30 Series Torque Converter 7" Driven Pulley Assembly - 3/4" Bore  Version 56This 30 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 3/4" shafts.  Driven clutch details:Overall OD of pulley: 183mm [7.2"]Asymmetric3/4" Bore3/16" key wayRed tension springReplaces Comet and Manco219464AKnown to fit 8hp-18hp..

30 Series Torque Converter 7" Driven Pulley Assembly - 5/8" Bore  This 30 series driven clutch pulley assembly is the torque converter for atvs, utvs and Go Karts with 5/8" shafts.  Driven clutch details:Overall OD of pulley: 183mm [7.2"]Asymmetric5/8" Bore3/16" key wayRed tension springReplaces Comet and Manco219457AKnown to fit 8hp-18hp engines w..

Torque Converter Clutch Driver Assembly - 30 Series 1" Bore for Go Karts and Mini BikesAssembly is a torque converter clutch for Go Karts and mini bikes.Driver clutch details:Overall OD of pulley: 116mm [4.6"]Overall OD if bell:125mm [4.9"]1" Bore3/16 key wayUses a 3/4" top width belt219554AKnown to fit 3hp - 8hp engines with 1" shafts.  Check pict..

Torque Converter Clutch Driver Assembly - 30 Series 3/4" Bore for Go Karts and Mini BikesVersion 55Assembly is a torque converter clutch for Go Karts and mini bikes.Driver clutch details:Overall OD of pulley: 116mm [4.6"]Overall OD if bell:125mm [4.9"]3/4" Bore3/16" key wayUses a 3/4" top width belt219552, 219552A, 5957, Q43201W9500001080G000   9.5..

Chinese ATV Clutch - 7 Plate - 300ccVersion 63Clutch assembly #63 is replacement clutch for 300cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:300cc7 plate - 5 plates together next to gear, 2 plates offset6 boltOD: 114mm [4.49"] plate assyOD: 125mm [4.91"] gear6 spline inner and o..

Centrifugal Clutch Pad Assembly - 33cc 43cc 47cc 49cc 2-StrokeVersion 50These centrifugal clutch pads / clutch shoes are used on 2-stroke dirt bikes, pocket bikes, scooters and more.  There's a couple of different versions that are a lot alike.  This one is made of steel, and we carry another one that is either aluminum or pot metal.  There are sma..

Chinese Clutch Primary Drive Gear with Inner Sleeve - 17 Teeth - 50cc-125ccDrive Gear details:17 Teeth Drive GearWill NOT for 18T drive gearsPopular in 50-125cc semi-auto enginesSome full-autos may use this drive gearInner sleeve includedKnown to fit all Kazuma 100cc & 110cc semi-auto ATVs & dirt bikes. [Falcon, Lacoste, Panda]**MACHINED FO..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 64This clutch assembly is the replacement clutch for many air cooled 200cc and 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.  Please check pictures and description before ordering.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.6..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 14Clutch assembly #14 is the replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.68"] plate assyID: 20mm [.78"] plate assy valley-to-valleyID: 18mm [.70"] p..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 18Clutch assembly (#18) is replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for CG 200 250 engine6 plate with top plate being off-set from other plates [version 14 has all plates ali..

Torque Converter Driven Pulley Assembly - 40 Series 5/8 Bore  Version 56This 40 series driven clutch pulley assembly is a torque converter for atvs, utvs and Go Karts with 5/8" shafts.  Driven clutch details:Overall OD of pulley: 193mm [7.6"]5/8 Bore3/16 key wayBuilt in keyReplaces Comet 40/44 series torq-a-verter models209151  209151A  2432Known t..

Chinese Torque Converter Assembly - 40 Series 3/4" Driven Clutch1" Driver ClutchVersion 58If you currently have a centrifugal clutch, you can upgrade by a going to a torque converter.  Torque converters improve take off power, acceleration and top end speed on atvs, utvs, Go Karts and other vehicles.  Version 58 fits a 1" engine crankshaft with a 1..

Chinese Torque Converter Assembly - 40 Series 5/8" Driven Clutch1" Driver ClutchVersion 57If you currently have a centrifugal clutch, you can upgrade by a going to a torque converter.  Torque converters improve take off power, acceleration and top end speed on atvs, utvs, Go Karts and other vehicles.  Version 57 fits a 1" engine crankshaft with a 1..

Chinese Torque Converter Assembly - 40 Series 7/8" Driven Clutch1" Driver ClutchVersion 57If you currently have a centrifugal clutch, you can upgrade by a going to a torque converter.  Torque converters improve take off power, acceleration and top end speed on atvs, utvs, Go Karts and other vehicles.  Version 57 fits a 1" engine crankshaft with a 1..

Centrifugal Clutch Pad Assembly - 33cc 43cc 47cc 49cc 2-StrokeVersion 53These centrifugal clutch pads / clutch shoes are used on 2-stroke dirt bikes, pocket bikes, scooters and more.  There's a couple of different versions that are a lot alike.  This one is made of either aluminum or pot metal, and we carry another one that is steel.  There are sma..

Deep Well Starter Clutch Nut Spanner ToolGY6-150 spanner toolThis specialty tool is for removing the 4 notched nut holding on the starter clutch on the GY6 150cc engine. This nut looks like a clutch nut used on the 50cc-110cc engines, however it is larger style nut. This nut has reverse threads and removes in the clockwise direction.Uses a 1/2 driv..

Chinese ATV Clutch - 17 Teeth - 50cc to 125ccVersion 1Clutch assembly (#01) is replacement clutch for most 50cc-125cc full automatic transmission BUT not all. Chinese manufactured brands and models. Very popular in smaller ATVs.Clutch details:Rear clutch for 50-110cc engine17 tooth basket - 6 tooth spline inner - 24 tooth on outerSpline hole diamet..

Chinese ATV Clutch - 17 Tooth - 50cc-125ccVersion 7 - FULL AutoClutch assembly (#07) is replacement clutch for many Chinese manufactured ATVs and dirt bikes.  Very popular disc style clutch assembly used in 50cc thru 125cc engines. For positive ID of your clutch, we recommend that you remove the right engine cover and inspect before ordering. This ..

Chinese ATV Clutch - 17 Tooth - 50cc-125ccVersion 2Clutch assembly (#02) is replacement clutch for many Chinese manufactured brands and models.  Very popular disc style clutch assembly used in 50cc thru 125cc engines. For positive ID of your clutch, we recommend that you remove the right engine cover and inspect before ordering. This clutch is NOT ..

Chinese ATV Clutch - 17 Teeth Gear Attached - 50cc to 125ccVersion 19Clutch assembly (#19) is replacement clutch for Baja 90cc, Yamoto 70cc, and other 50cc-125cc engines.  Normally used in full automatic transmission. Chinese manufactured brands and models. Clutch details:Rear clutch for 50-125cc engine17 tooth basket gear spot welded to drum baske..

Chinese ATV Clutch - 18 Tooth - 50cc-125ccVersion 3Clutch assembly (#03) is replacement clutch for many Chinese manufactured brands and models.  Very popular disc style clutch assembly used in 50cc thru 125cc engines. For positive ID of your clutch, we recommend that you remove the right engine cover and inspect before ordering. This clutch is NOT ..

Lifan  Clutch - 18 Teeth - 70cc to 125cc - MANUALVersion 4Clutch assembly (#04) is replacement clutch for several 70-125cc manual transmission BUT not all. Chinese manufactured brands and models. Very popular in smaller ATVs and pit bikes.Clutch details:Rear clutch for 70-125cc engine18 tooth inner - 17 tooth on outer  - 6 tooth spline innerSpline ..

Chinese Clutch - 19 Spline - GY6 125cc 150ccVersion 9Clutch assembly (#09) is replacement clutch for GY6 150cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for GY6 150 engine19 splines inside the clutch drum/bellOD of bell: 136.4mm [5.37"]ID of bell: 125mm [4.91"]ID of..

Chinese Clutch - 19 Spline - GY6 170cc 175cc 200ccVersion 38This is the OEM clutch for the Tao Tao Bull 200, Raptor 200 atvs and the 4FUN 200 Go Kart.  It also fits the Snow Fox and Snow Leopard snowmobiles.  It looks a lot like the clutch for the GY6 150cc, but the shoes are wider.  Please look at pictures and description before ordering.Clutch de..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Clutch Assembly - Version 27 - Tao Tao ATA125D Version 27Clutch assembly (#27) is the replacement clutch for several Taotao ATVs and dirt bikes.  Also fits other 110cc-125cc full-automatic units.Clutch details:Solid caseThe smallest gear has 6 splines.The outside case has 16 tabs and a large snap ring that hold it all together.ID: 15mm peak..

Centrifugal Clutch Assembly - 3/4 Bore 10 Tooth for Go Karts and Mini BikesVersion 50Clutch assembly is a centrifugal clutch for Go Karts and mini bikes.Clutch details:3/4 Bore10 Tooth / TeethCan be used with #40, #41 and 420 chain31913563   MB200-241  168AKnown to fit 5.5hp and 6.5hp engines with 3/4" shafts including Baja Heat, Warrior, Mini Baja..

Centrifugal Clutch Assembly - 3/4 Bore 12 Tooth for Go Karts and Mini BikesVersion 51Clutch assembly is a centrifugal clutch for Go Karts and mini bikes.Clutch details:3/4 Bore12 Tooth / TeethUses #35 chainKnown to fit 6.5hp engines with 3/4" shaft including Harbor Freights Predator 212cc engine.  Check pictures and measurements to be sure this is ..

Centrifugal Clutch Assembly - 5/8 Bore 10 Tooth for Go Karts and Mini BikesVersion 52Clutch assembly is a centrifugal clutch for Go Karts and mini bikes.Clutch details:5/8 Bore10 Tooth / TeethCan be used with #40, #41 and 420 chainKnown to fit 2hp and 3hp engines with 5/8" shafts.  Check pictures and measurements to be sure this is the correct clut..

Centrifugal Clutch Assembly - 5/8 Bore 11 Tooth for Go Karts and Mini BikesVersion 53Clutch assembly is the centrifugal clutch for many Go Karts and mini bikes.Clutch details:5/8 Bore11 Tooth / TeethUsed with #35 chainKnown to fit 2hp and 3hp engines with 5/8" shafts.  Tao Tao ATD80A and GK80.  Also the Motovox MBX10 and MBX11 mini bikes.  Check pi..

Centrifugal Clutch Assembly - 5/8 Bore 12 Tooth for Go Karts and Mini BikesVersion 54Clutch assembly is a centrifugal clutch for Go Karts and mini bikes.Clutch details:5/8 Bore12 Tooth / TeethUsed with #35 chainFS-10020Known to fit 6.5hp engines with 5/8" shafts.  Fits the Coleman SK100 Go Kart.  Check pictures and measurements to be sure this is t..

Chinese Front Drive Variator Clutch AssemblyGY6 125cc 150cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diameter: 11.5c..

Chinese Front Drive Variator Clutch AssemblyHigh Performance - GY6 125cc 150ccCVT - AutoChinese high performance variator clutch assembly for the CVT fully automatic 125cc, 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:10g weightsVariator face diameter:  11.4cm [4.50"]Variator center hole di..

Chinese Front Drive Variator Clutch AssemblyGY6 170cc 175cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 170cc and 175cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diame..

Chinese Front Drive Variator Clutch AssemblyGY6 170cc 200cc - CVT - AutoChinese complete variator assembly for the CVT "automatic with reverse" 170cc and 200cc engines used in several makes and models of go karts and some atvs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diameter: ..

Chinese Clutch - 22 Spline - GY6 50cc QMB139Version 8This clutch assembly it the replacement clutch for GY6 50cc Chinese scooters.  Fits almost every brand and model of 50cc gas Chinese scooter out there.  Please check pictures and measurements before ordering.Clutch details:Rear clutch for GY6 50 engine22 splines inside the clutch drum/bellOD of d..

Chinese Racing Clutch - 22 Spline - GY6 50cc QMB139 ScooterVersion 12Racing clutch assembly for GY6 50cc Chinese manufactured brands and models. Very popular in mopeds & scooters. Clutch details:Rear clutch for GY6 50 engine22 splines inside the clutch drum/bellOD of bell:  117mm [4.6"]OD of pulley: 119mm [4.68"]ID of pulley bearing: 17mm  [HK1..

Chinese Front Drive Variator Clutch AssemblyGY6 50cc [QMB139] - CVT - AutoChinese complete variator assembly for the CVT fully automatic 50cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face is plastic with a notch/tab metal gear for the spline shaftDrive face center hole: 26 teeth [spline..

Chinese Front Drive Variator Clutch AssemblyGY6 50cc [QMB139] - CVT - AutoHIGH PERFORMANCEChinese complete high performance variator assembly for the CVT fully automatic 50cc engines on several makes and models of scooters.Variator details:Variator face OD: 8.9cm [3.5"]Variator face ID: 20mm [.79"]Roller width: 13mm [.5"]Roller OD: 16mm [.63"]Rolle..

Centrifugal Clutch Assembly - Kandi 50cc ATVsVersion 140This centrifugal clutch assembly is used on the Kandi KD60A-1 and KD60A-2 50cc atvs.  This clutch may also be found on other atvs, mini-bikes, scooters, Go Karts  and lawn mowers. Clutch drum details:OD: 81.7mm [3.21"]ID: 78.1mm [3.07"]10mm*1.50 threadsClutch shoe specs:3 pads3 springsID of ce..

Chinese ATV Clutch - 5 Plate - JS250 ATVVersion 25Clutch assembly #25 is the secondary clutch for the JS250 Chinese manufactured brands and models such as Bashan, Loncin and Baja 250cc ATVs.Clutch details:Rear clutch for 200cc 250cc 300cc engine6 spline shaft4 boltID: 9.5mm plate assy shaft peak-to-peakID: 12mm plate assy shaft valley-to-valleyID: ..

Chinese Clutch Assembly - 5 Plate - Viper 150cc, Honda CG150 CloneVersion 23Clutch assembly (#23) is the replacement clutch for the CG 150cc Honda clone engine. Fits many Chinese manufactured brands and models. Very popular in dirt bikes, motorcycles and scooters.Clutch details:Rear clutch for CG 125-150cc engine30mm [1.18"] splined shaft inside di..

Chinese Clutch - 19 Spline - 250ccVersion 10Clutch assembly (#10) is replacement clutch for 250cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for 250cc engine19 splines inside the clutch drum/bell14mm ID spline shaftOD of bell: 145mm [5.71"]ID of bell: 134mm [5.27"]OD..

Chinese Front Drive Variator Clutch AssemblyWater Cooled 250cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 250cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 21 teethDrive face hole diameter:  15.85mm [.62"]Drive face diameter: 128mm [5"]Vari..

Chinese ATV Scooter Clutch - 16 Spline - 250cc 260cc 300ccVersion 20 - Newer Version with Smaller BellClutch assembly is usually used on water cooled 250cc, 260cc and 300cc Chinese manufactured brands and models. Also used on the Hart Karts with the 300cc engine. Known to fit Manco, Talon, Linhai, Buyang, Roketa, and many more.  Please measure and ..

Chinese ATV Scooter Clutch - 16 spline - 260ccVersion 11 Older Version with Larger BellClutch assembly (#11) is usually used on water cooled 250cc 260cc Chinese manufactured brands and models. Also used on the Hart Karts with the 300cc engine. Known to fit Manco, Talon, Linhai, Buyang, Roketa, and many more.  Please measure and compare before order..

Chinese Front Drive Variator Clutch Assembly250cc 260cc 300cc - CVT - Auto - Linhai YamahaChinese complete variator assembly for the CVT fully automatic Linhai 260-300cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 18 teeth [spline shaft]Drive face hole diameter:  19.34mm ..