200cc 4-Stroke Engine Parts

200cc 4-Stroke Engine Parts

Grid View:
Quickview

150cc 200cc 250cc Stator Magneto w/ Matching Flywheel 8 Coil

Chinese 8-Coil Stator Magneto with Matching Flywheel for 150cc, 200cc & 250cc EnginesThis Chinese stator magneto with flywheel is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This stator fits 150cc - 250cc models.  Stator description:8 coil - 1 wrapped5 wires - 45cm [17.75"] overall length2 or 3 bolt ..

$64.95
2-3 Days
Quickview

150cc-250cc Exhaust Gasket 32.7mm

Chinese Exhaust GasketChinese exhaust gasket 32.7mm fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This gasket is used with many 150cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this gasket is the correct application for your model.Gasket description:OD - 32.7mm exhaust gasketID - 25.7mm..

$1.20
Quickview

150cc-250cc Oil Dipstick 5.9" #4

Chinese ATV Engine Oil DipstickVersion 4This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 150cc to 250cc models.  Dipstick description:White with chrome capCap OD: 29mm (1.14")Length from cap to end: 129mm [5.06"]Overall length: 145mm (5.7")Compatible with 150cc-250c..

$3.30
Quickview

200cc - 250cc Intake Manifold 30mm #27

Chinese Intake Manifold 30mm IDVersion 27Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center. Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bol..

$7.92
2-3 Days
Quickview

200cc 250cc Air Cooled ATV Complete Gasket Set - 63mm

Chinese 200cc 250cc Gasket Set for ATVs, Dirt-Bikes and Go Karts.This Chinese gasket set is used for many 4-stroke Chinese  ATVs.  This gasket set fits 250cc air cooled models.  Gasket set description:Air cooledHead Gasket ID: 69mmBase Gasket ID: 76.5mmComplete set for 63mmCompatible with 200cc 250cc 4 stroke11830A10212Known to fit Taotao ATA250B, ..

$14.25
2-3 Days
Quickview

200cc 250cc ATV ATA250D Engine Seal Set

Chinese Engine Seal Set for 200cc 250cc ATVs.This Chinese engine oil seal set is the replacement part for many 4-stroke Chinese  ATVs,  Fits 200cc and 250cc engines.Engine oil seal set contains the following seals:1 seal: 20 x 34 x 71 seal: 14 x 28 x 21 seal: 16 x 28 x 21 seal: 22 x 35 x 71 seal: 34 x 50 x 72 seal: 6.5 x 4.5 x 1Compatible with 200c..

$12.05
Quickview

200cc 250cc Engine Water Pump Assembly #3

Chinese Water Pump AssemblyVersion 3This Chinese water pump assembly for 200cc - 250cc water cooled engine is used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements to determine the best match for your machine.  Kit contains 8 pieces.Water pump details:Chrome cover with two parallel h..

$34.95
Quickview

200cc 250cc Engines Stator Magneto Flywheel

Chinese Stator Magneto Flywheel - JS 250 engineVersion 4Chinese stator magneto flywheel for 200cc 250cc engines.  May also fit other engines.  Please use the measurements and pictures to match your part.Flywheel description:Overall OD including "tab": 113mm [4.45"]Overall OD not including "tab": 110mm [4.35"]ID of magnetic area: 90mm [3.55"]OD of i..

$47.90
Quickview

200cc 250cc Front Sprocket 428-13 Tooth

Chinese ATV Front Sprocket - 428-13T 200ccThis front sprocket is used on the Chinese 200cc engines.  This sprocket has 13T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain used on ATVs usually with a 7 inch rear wheel or smaller13TOD: 61mm [2.4"]ID: 20.1mm [.79"] valley to valleyID: 17.6mm [.69"] tooth to toothMounting holes ..

$7.65
Quickview

200cc 250cc Front Sprocket 428-14 Tooth

Chinese ATV Front Sprocket - 428-14T 200ccThis front sprocket is used on the Chinese 200cc engines.  This sprocket has 14T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain  14TOD: 61mm [2.4"]ID: 20.1mm [.79"] valley to valleyID: 17.6mm [.69"] tooth to tooth(2) 6mm threaded holes 34mm apart center-to-centerUses retainer with b..

$7.65
Quickview

200cc 250cc Front Sprocket 530-12 Tooth

Chinese ATV Front Sprocket - 530-12TThis front sprocket is used on the Chinese 200cc-250cc engines.  This sprocket has 12T and is compatible with the 530 chain ONLY.  Used with CG200 & CG250 engines.Sprocket details:#530 chain used on ATVs & dirt bikes12TMounting holes distance: 34mm center to centerID: 20.1mm [.79"] valley to valleyID: 17...

$12.38
Quickview

200cc 250cc Oil Dipstick 5.5" #7

Chinese ATV Engine Oil DipstickVersion 7This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Cap Measurement: 29.4mm (1.16")Thread diameter: 19.1mm [.75"]End Measurement: 19mm (.75")Overall Measurement: 143.4mm (5.65")..

$3.30
Quickview

200cc 250cc Oil Dipstick 5.6" #8

Chinese ATV Engine Oil DipstickVersion 8This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Cap Diameter: 29.5mm (1.16")Thread diameter: 20mm [.78"]End Measurement: 20.5mm (.80")Overall Measurement: 143mm (5.65")Lengt..

$3.30
Quickview

200cc 250cc Oil Dipstick 5.8" #9

Chinese ATV Engine Oil DipstickVersion 9This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Black with chrome capCap diameter: 29mm (1.14")Thread diameter: 19mm [.74"]End measurement: 23mm (.90")Overall measurement: 1..

$3.30
Quickview

200cc CG Engine Starter Idler - Reduction Gear Assembly - 17 Tooth

200cc CG Engine Start Idle Gear AssemblyGear Description:3 pc. assemblyKnown to fit 200cc CG EngineCHECK TOOTH COUNT BELOWSmall double gear details:Small gear - 17 toothLarger gear - 16 toothOverall length - 41.2mm [1.625"]Large double gear details:Small gear - 17 toothLarger gear - 60 toothOverall length - 25.45mm [1"]Rod details:Overall length - ..

$22.73
2-3 Days
Quickview

200cc Go Kart ATVs Motorcycles Cylinder Head Gasket Set 64mm

This cylinder head gasket set fits the Taotao ATA250D as well as other 200cc air cooled atvs, dune buggies and dirt bikes.  Set includes both head gaskets. Air cooled engineNote the oversized hole on the black gasket and the key hole shape on the grey gasket13119A1745These head gaskets fit the Taotao ATA250D and the 250 Sport Utility ATVs.  They fi..

$5.45
2-3 Days
Quickview

200cc to 250cc Air Cooled Engine Clutch Cover Gasket

Chinese Clutch Cover Gasket for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese clutch cover gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the clutch cover [right side] of push-rod style air-cooled 200cc-250cc models.  Gasket description:Clutch housingRight side engine cover..

$3.85
Quickview

200cc to 250cc Air Cooled Engine Stator Cover Gasket

Chinese Stator Cover Gasket for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese stator cover gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the clutch cover [right side] of push-rod style air-cooled 200cc-250cc models.  Gasket description:Stator housingLeft side engine cover ..

$3.95
2-3 Days
Quickview

200cc to 250cc Stator Cover #4

Chinese ATV Stator CoverA cover for the left side engine.  Cover is used on 200cc - 250cc engines.Stator cover details:Center hole diameter from front of cover: 28.25mm [1.1"]Length at longest point: 23.75cm [8.75"]Inside measurement of holes on edge of cover: 35mm [1.375"] center to center3 hole stator mountingMounting distance for the stator hole..

$43.95
Quickview

200cc-250cc Front Sprocket Chain Cover #1

Chinese ATV Front Sprocket Chain CoverVersion 1A common left back engine cover that is used to cover the chain and sprocket area on several 200-250cc Chinese ATV engines 4 speed with reverse.Chain cover details:Cover width next to engine: 15cm [5.9"]Length at longest point: 11.5cm [4.53"]Mounting holes center to center: 15.3cm [6"]Contoured edge fu..

$16.25
Quickview

200cc-250cc Intake Manifold 27mm #7

Chinese Intake Manifold 27mm IDVersion 7Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center. Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bolt..

$7.65
Quickview

200cc-250cc Intake Manifold 27mm #8

Chinese Intake ManifoldVersion 8Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bolt measurem..

$5.95
Quickview

ATV Dirt Bike CG 200cc 250cc Clutch Assembly - 6 Plate - 6 Bolt - 70 Tooth #64

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 64This clutch assembly is the replacement clutch for many air cooled 200cc and 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.  Please check pictures and description before ordering.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.6..

$70.40
Quickview

ATV Dirt Bike CG 200cc 250cc Clutch Assembly - 6 Plate - 6 Bolt - 73 Tooth #14

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 14Clutch assembly #14 is the replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.68"] plate assyID: 20mm [.78"] plate assy valley-to-valleyID: 18mm [.70"] p..

$70.40
Quickview

ATV Dirt Bike CG 200cc 250cc Clutch Assembly - 6 Plate - 6 Bolt - 73 Tooth #18

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 18Clutch assembly (#18) is replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for CG 200 250 engine6 plate with top plate being off-set from other plates [version 14 has all plates ali..

$64.90
Quickview

CG200 Engine Starter Gear Cover

Chinese Starter Gear CoverCG200A cover for the starter gear on the CG200 engine.  Cover is used on Lifan 200cc engines.Starter gear cover details:ChromeHeight: 39mm [1.53"]Center hole diameter: 10mm [.39"]OD around o-ring: 68mm [2.69"]Includes o-ringShipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once..

$10.94
Quickview

CG200 Engine Starter Idler - Reduction Gear Assembly - 18 Tooth

200cc CG Engine Start Idle Gear AssemblyGear Description:3 pc. assemblyKnown to fit 200cc CG EngineCHECK TOOTH COUNT BELOWSmall double gear details:Small gear - 14 toothLarger gear - 16 toothOverall length - 40.9mm [1.6"]Large double gear details:Small gear - 18 toothLarger gear - 62 toothOverall length - 26.5mm [1.01"]Rod details:Overall length - ..

$21.73
2-3 Days
Quickview

Front Sprocket 428-13 Tooth - Honda - [K22-2501E] Parts Unlimited

Parts Unlimited Front Sprocket - 428 13T - Honda - [K22-2501E]Details:13 toothChain size 428Center measurement - 18mm - 20mm  LARGER SHAFTAll our front and rear sprockets are manufactured to OEM specs using high-grade hardened steel for long lifeAll match original equipment exactly and feature precision-machined splines and teeth for a perfect fitK..

$6.95
Quickview

Front Sprocket 428-13 Tooth - Honda - [K22-2890] Parts Unlimited

Parts Unlimited Front Sprocket - 428 13T - Honda - [K22-2890]Details:13 toothChain size 428Center measurement - 14mm - 17mm - smaller standard shaftAll our front and rear sprockets are manufactured to OEM specs using high-grade hardened steel for long lifeAll match original equipment exactly and feature precision-machined splines and teeth for a pe..

$6.95
Quickview

Front Sprocket 428-14 Tooth - Honda - [K22-2508] Parts Unlimited

Parts Unlimited Front Sprocket - 428 14T - Honda - [K22-2508]Details:14 toothChain size 428Center measurement - 18mm - 20mm  LARGER SHAFTAll our front and rear sprockets are manufactured to OEM specs using high-grade hardened steel for long lifeAll match original equipment exactly and feature precision-machined splines and teeth for a perfect fitKn..

$7.50
Quickview

Front Sprocket 428-15 Tooth - Honda [K22-2549] Parts Unlimited

Parts Unlimited Front Sprocket - 428 15T - Honda -  [K22-2549]Details:15 toothChain size 428Larger shaft hole - 20mmAll our front and rear sprockets are manufactured to OEM specs using high-grade hardened steel for long lifeAll match original equipment exactly and feature precision-machined splines and teeth for a perfect fitKnown to fit Honda 1970..

$6.95
Quickview

Front Sprocket 520-12 Tooth - Honda - [JTF1324-12] JT Sprockets

JT Sprockets Brand Front Sprocket - 520 12T - Honda - [JTF1324.12]Details:12 toothChain size 520Fits 20mm - shaftGearing 12/42Every sprocket meets or exceeds the highest possible quality standardsSprockets are heat-treated and beadblasted to reduce material surface tensionFront sprockets are made with top-quality Japanese C45 high carbon steel and ..

$10.95
Quickview

Front Sprocket 520-13 Tooth - Honda - [JTF1324-13] JT Sprockets

JT Sprockets Brand Front Sprocket - 520 13T - Honda - [JTF1324.13]Details:13 toothChain size 520Fits 20mm - shaftGearing 13/42Every sprocket meets or exceeds the highest possible quality standardsSprockets are heat-treated and beadblasted to reduce material surface tensionFront sprockets are made with top-quality Japanese C45 high carbon steel and ..

$12.95
Quickview

Intake Manifold 27mm - PZ27 Carburetors #61

Chinese Intake Manifold 27mm IDVersion 61This Chinese 27mm intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:ID: 27mm [1.06"]Mounting holes are 61.5mm [2.42..

$6.85
Quickview

Intake Manifold 28mm - PZ27 Carburetors #60

Chinese Intake Manifold 28mm IDVersion 60This Chinese 28mm intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:ID: 30mm [1.06"] on stud endID: 28.5mm [1.12"] ..

$6.55
Quickview

Panther 200UT 200cc ATV Clutch Cover #3

Chinese Clutch Cover - Panther 200UT 200cc ATVThis Chinese clutch cover is the replacement part for the 200cc Panther 200UT Engine.  It may fit other 200cc engines.  Please use pictures and descriptions to determine fit.Cover description:Overall length: aprox 10 inchesOverall height: aprox 7.75 inchesOverall width:  aprox 3.25 inchesLower hole has ..

$30.74
2-3 Days
Quickview

Radiator Cap 13psi (0.9) for Polaris - Large - [1903-0028] Moose Utility

Moose Utility Division Radiator Cap 13psi (0.9) - Polaris - Large - [1903-0028]Cap details:OD of cap: 59mm [2.32"]Overall height: 30.5mm [1.2"]0.9 Bar or 13 PSIFits the following Polaris models:Hawkeye 300 [All] - 2011-2015ACE 325 - 2014-2015Sportsman 325 ETX - 2015Sportsman 400 - 2001-2004Sportsman 400 HO - 2008-2014Xpedition 425 - 2000-2002Sports..

$15.95
2-3 Days
Quickview

Radiator Cap 13psi (0.9) for Polaris - [1903-0027] Moose Utility

Moose Utility Division Radiator Cap 13psi (0.9) - Polaris - [1903-0027]Cap details:OD of cap: 45mm [1.75"]Overall height: 25mm [.98"]0.9 or 13 PSIFits the following Polaris models:Trail Blazer 250 - 1996-1997Xpress 300 - 1996-1997ACE 325 [2015 is HD Model ONLY] - 2015-2016350L - 1993Trail Boss 350L - 1990-1992400L - 1994-1995Big Boss 400L - 1995-19..

$15.95
Quickview

Temperature Sensor w/ Wiring Pigtail

Chinese Temperature SensorThis Chinese sensor for water cooled engines is used in several makes and models of ATVs, scooters, mopeds, and go karts.  This sensor includes a 5 inch pigtail with a 2-wire female plug.  Please use detailed pictures and measurements for best match for your machine.Sensor details:2-prong sensor2-wire female plugScrews int..

$9.84
Quickview

Water Cooled 200cc 250cc ATVs Go Kart Radiator Cooling Fan #3

Electric Cooling Fan Motor for 200cc - 250cc Chinese Atv's, Go Karts, Dirt Bikes, Buggies, etc.Version 3Fan details:Mounting holes at corners are aprox. 4 inches apart.Mounting holes on wings are aprox. 6.5 inches apart.Actual fan is 4.66 inches squareHeight - 1.3 inches7 bladed fan.2 wire plug.Please look at pictures.Known to fit Coolster 3200, 32..

$19.74
Quickview

Water Cooled Engine Temperature Sensor 2-Prong

Chinese Temperature SensorThis Chinese sensor for water cooled engines is used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Sensor details:2-ProngScrews into the radiatorOverall length: 41mm [1.61"]Thread diameter: 16mmEasy replacement with 22mm wr..

$7.70
Showing 1 to 41 of 41 (1 Pages)