250cc 4-Stroke Engine Parts

Chinese 8-Coil Stator Magneto with Matching Flywheel for 150cc, 200cc & 250cc EnginesThis Chinese stator magneto with flywheel is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This stator fits 150cc - 250cc models.  Stator description:8 coil - 1 wrapped5 wires - 45cm [17.75"] overall length2 or 3 bolt ..

Chinese Exhaust GasketChinese exhaust gasket 32.7mm fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This gasket is used with many 150cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this gasket is the correct application for your model.Gasket description:OD - 32.7mm exhaust gasketID - 25.7mm..

Chinese ATV Engine Oil DipstickVersion 4This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 150cc to 250cc models.  Dipstick description:White with chrome capCap OD: 29mm (1.14")Length from cap to end: 129mm [5.06"]Overall length: 145mm (5.7")Compatible with 150cc-250c..

Chinese Intake Manifold 30mm IDVersion 27Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center. Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bol..

Chinese 200cc 250cc Gasket Set for ATVs, Dirt-Bikes and Go Karts.This Chinese gasket set is used for many 4-stroke Chinese  ATVs.  This gasket set fits 250cc air cooled models.  Gasket set description:Air cooledHead Gasket ID: 69mmBase Gasket ID: 76.5mmComplete set for 63mmCompatible with 200cc 250cc 4 stroke11830A10212Known to fit Taotao ATA250B, ..

Chinese Engine Seal Set for 200cc 250cc ATVs.This Chinese engine oil seal set is the replacement part for many 4-stroke Chinese  ATVs,  Fits 200cc and 250cc engines.Engine oil seal set contains the following seals:1 seal: 20 x 34 x 71 seal: 14 x 28 x 21 seal: 16 x 28 x 21 seal: 22 x 35 x 71 seal: 34 x 50 x 72 seal: 6.5 x 4.5 x 1Compatible with 200c..

Chinese Water Pump AssemblyVersion 3This Chinese water pump assembly for 200cc - 250cc water cooled engine is used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements to determine the best match for your machine.  Kit contains 8 pieces.Water pump details:Chrome cover with two parallel h..

Chinese Stator Magneto Flywheel - JS 250 engineVersion 4Chinese stator magneto flywheel for 200cc 250cc engines.  May also fit other engines.  Please use the measurements and pictures to match your part.Flywheel description:Overall OD including "tab": 113mm [4.45"]Overall OD not including "tab": 110mm [4.35"]ID of magnetic area: 90mm [3.55"]OD of i..

Chinese ATV Front Sprocket - 530-12TThis front sprocket is used on the Chinese 200cc-250cc engines.  This sprocket has 12T and is compatible with the 530 chain ONLY.  Used with CG200 & CG250 engines.Sprocket details:#530 chain used on ATVs & dirt bikes12TMounting holes distance: 34mm center to centerID: 20.1mm [.79"] valley to valleyID: 17...

Chinese ATV Engine Oil DipstickVersion 7This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Cap Measurement: 29.4mm (1.16")Thread diameter: 19.1mm [.75"]End Measurement: 19mm (.75")Overall Measurement: 143.4mm (5.65")..

Chinese ATV Engine Oil DipstickVersion 8This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Cap Diameter: 29.5mm (1.16")Thread diameter: 20mm [.78"]End Measurement: 20.5mm (.80")Overall Measurement: 143mm (5.65")Lengt..

Chinese ATV Engine Oil DipstickVersion 9This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This dipstick fits 200cc-250cc 4-stroke engines.  Dipstick description:Black with chrome capCap diameter: 29mm (1.14")Thread diameter: 19mm [.74"]End measurement: 23mm (.90")Overall measurement: 1..

Chinese Clutch Cover Gasket for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese clutch cover gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the clutch cover [right side] of push-rod style air-cooled 200cc-250cc models.  Gasket description:Clutch housingRight side engine cover..

Chinese Stator Cover Gasket for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese stator cover gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the clutch cover [right side] of push-rod style air-cooled 200cc-250cc models.  Gasket description:Stator housingLeft side engine cover ..

Chinese ATV Stator CoverA cover for the left side engine.  Cover is used on 200cc - 250cc engines.Stator cover details:Center hole diameter from front of cover: 28.25mm [1.1"]Length at longest point: 23.75cm [8.75"]Inside measurement of holes on edge of cover: 35mm [1.375"] center to center3 hole stator mountingMounting distance for the stator hole..

Chinese ATV Front Sprocket Chain CoverVersion 1A common left back engine cover that is used to cover the chain and sprocket area on several 200-250cc Chinese ATV engines 4 speed with reverse.Chain cover details:Cover width next to engine: 15cm [5.9"]Length at longest point: 11.5cm [4.53"]Mounting holes center to center: 15.3cm [6"]Contoured edge fu..

Chinese Intake Manifold 27mm IDVersion 7Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center. Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bolt..

Chinese Intake ManifoldVersion 8Chinese 200cc-250cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 62mm [2.44"] Stud bolt measurem..

Chinese Temperature SensorThe Chinese sensor for the 250cc water cooled engine used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Sensor details:Fits 250cc WATER cooled engineOverall length: 43.67mm [1.72"]10mm*1.0 threadsEasy replacement with 12mm ..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 64This clutch assembly is the replacement clutch for many air cooled 200cc and 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.  Please check pictures and description before ordering.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.6..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 14Clutch assembly #14 is the replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in ATVs and dirt bikes.Clutch details:Rear clutch for CG 200 250 engine6 tooth plate assyOD: 120mm [4.68"] plate assyID: 20mm [.78"] plate assy valley-to-valleyID: 18mm [.70"] p..

Chinese ATV Clutch - 6 Plate - CG 200cc 250ccVersion 18Clutch assembly (#18) is replacement clutch for CG 200cc 250cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for CG 200 250 engine6 plate with top plate being off-set from other plates [version 14 has all plates ali..

Engine Bracket Side Plate for a Taotao ATA250D ATV. This plate is part of the engine bracket assy for the Taotao ATA250D.  The left and right side of the bracket use the same plate.Overall measurements: 10.5 cm Longest side - 5.8 cm Short straight angle side - 6.5 cm angle edgeStraight longest side mounting: 81mmStraight shortest side mounting: 45m..

Chinese Intake Manifold 27mm IDVersion 61This Chinese 27mm intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:ID: 27mm [1.06"]Mounting holes are 61.5mm [2.42..

Chinese Intake Manifold 28mm IDVersion 60This Chinese 28mm intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:ID: 30mm [1.06"] on stud endID: 28.5mm [1.12"] ..

Chinese Intake Manifold 30.5mm IDVersion 9This intake manifold fits many Chinese 4-stroke 250cc ATVs, dirt bikes, go karts, mopeds, and scooters.  The manifold is known to fit JS250cc models. Manifold description:ID on metal end: 30.5mm [1.20"]Mounting hole distance: 62mm [2.44"] center-to-centerID on rubber end: 36mm [1.42"]Overall height: Short s..

Chinese ATV Engine Oil DipstickVersion 2This Chinese dipstick is the replacement part for many 4-stroke Chinese Go Karts and Scooters. This dipstick fits 250cc models.  Dipstick description:Cap Measurement: 30mm (1.18")Thread measurement: 18.6mm [.73"]End Measurement: 13.3mm (.52")Overall Measurement: 65.2mm (2.57")Thread size: M18*2.5GY6 CF250, CH..

Oil Filter Genuine OE Hisun Oil filter for 250cc thru 750cc UTV's & Side by Side'sThis is the original equipment spin-on oil filter for the Hisun 250cc-750cc UTV's.  Hisun in no longer shipping in the pretty red and white boxes, but the product is the same. Filter specs:Diameter: 63.4mm [2.5"]Height: 61.6mm [2.42"]Thread Pitch 3/4"-16UNFWill fi..

Moose Utility Division Radiator Cap 13psi (0.9) - Polaris - Large - [1903-0028]Cap details:OD of cap: 59mm [2.32"]Overall height: 30.5mm [1.2"]0.9 Bar or 13 PSIFits the following Polaris models:Hawkeye 300 [All] - 2011-2015ACE 325 - 2014-2015Sportsman 325 ETX - 2015Sportsman 400 - 2001-2004Sportsman 400 HO - 2008-2014Xpedition 425 - 2000-2002Sports..

Moose Utility Division Radiator Cap 13psi (0.9) - Polaris - [1903-0027]Cap details:OD of cap: 45mm [1.75"]Overall height: 25mm [.98"]0.9 or 13 PSIFits the following Polaris models:Trail Blazer 250 - 1996-1997Xpress 300 - 1996-1997ACE 325 [2015 is HD Model ONLY] - 2015-2016350L - 1993Trail Boss 350L - 1990-1992400L - 1994-1995Big Boss 400L - 1995-19..

Chinese ATV Clutch - 5 Plate - JS250 ATVVersion 25Clutch assembly #25 is the secondary clutch for the JS250 Chinese manufactured brands and models such as Bashan, Loncin and Baja 250cc ATVs.Clutch details:Rear clutch for 200cc 250cc 300cc engine6 spline shaft4 boltID: 9.5mm plate assy shaft peak-to-peakID: 12mm plate assy shaft valley-to-valleyID: ..

Chinese Stator Magneto Flywheel - JS 250 engineVersion 5Chinese stator magneto flywheel for Jianshe 250cc engines.  May also fit other engines.  Please use the measurements and pictures to match your part.Flywheel description:Overall OD including "tab": 121mm [4.76"]Overall OD not including "tab": 119mm [4.7"]ID of magnetic area: 95mm [3.75"]OD of ..

Chinese Temperature SensorThis Chinese sensor for water cooled engines is used in several makes and models of ATVs, scooters, mopeds, and go karts.  This sensor includes a 5 inch pigtail with a 2-wire female plug.  Please use detailed pictures and measurements for best match for your machine.Sensor details:2-prong sensor2-wire female plugScrews int..

Electric Cooling Fan Motor for 200cc - 250cc Chinese Atv's, Go Karts, Dirt Bikes, Buggies, etc.Version 3Fan details:Mounting holes at corners are aprox. 4 inches apart.Mounting holes on wings are aprox. 6.5 inches apart.Actual fan is 4.66 inches squareHeight - 1.3 inches7 bladed fan.2 wire plug.Please look at pictures.Known to fit Coolster 3200, 32..

Chinese Crankshaft - GY6 250cc EngineVersion 3Chinese ATV, Go Kart, scooter crankshaft fits several makes & models.  Please use the pictures and measurements to best match your crank.Crank shaft details:Over Length: 29cm [11.42"]Bearing size/model: 28 ID X 68 OD X 18 H [63/28/P6]Sprockets: 16 teethSpline count on end of shaft: 21 teeth splineTh..

Chinese 250cc Cooling FanVersion 1The Chinese radiator fan for the 250cc water cooled engine used in several makes and models of scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Fan details:Fits 250cc water cooled engineMounting bolt holes distance: 21.5cm [8.4"] center to center across f..

Chinese Radiator Thermostat for Water Cooled 250ccVersion 1The Chinese thermostat for the 250cc water cooled engine used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Cover details:Fits 250cc WATER cooled engineWidth including rubber gasket 33mm [1...

Chinese Engine Gasket Set for 250ccThis Chinese gasket set is used for many 4-stroke Chinese scooters. This gasket set fits 250cc models.  Gasket set description:10 piecesCompatible with 250cc 4 strokeCF250,CH250,CN25011878A1056This kit includes all the engine gaskets in picture.  In addition to fitting all Taotao 250cc scooters, this gasket set al..

Chinese Temperature SensorThis Chinese sensor for water cooled engines is used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Sensor details:2-ProngScrews into the radiatorOverall length: 41mm [1.61"]Thread diameter: 16mmEasy replacement with 22mm wr..

Chinese Water Pump Assembly for 250cc EngineVersion 1The Chinese water pump assembly for 250cc water cooled engine used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Cover details:Fits 250cc WATER cooled engine6 Blades on impellerImpeller OD: 38mm [..

Chinese Engine Gasket Set for Linhai 250cc, 260cc and 300cc This Chinese gasket set is used for many 4-stroke Chinese scooters and atvs. This gasket set fits the Yamaha Linhai 250cc, 260cc and 300cc models.  Gasket set description:12 piece setIncludes everything in picture4-stroke engine169mm 170mmVOG260  BN169MMKnown to fit  American Sportworks 26..

Chinese Intake Manifold Gasket for ATVs, Scooters and Go Karts.This Chinese intake manifold gasket is the replacement part for the LInhai 250cc, 260cc and 300cc engines. Gasket description:ID: 29.4mm (1.16")Overall length: 75mm (2.95")Bolt holes - center to center - 62mm (2.4")Thickness: 5mmIncludes o-ringVOG 260Known to fit  American Sportworks 26..

Chinese Radiator ThermostatVersion 260The Chinese thermostat for the Linhai 250cc - 300cc water cooled engines used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Cover details:Fits 260cc and 300cc WATER cooled enginesOD including rubber gasket: 32mm..

Chinese Thermostat HousingVersion 25The Chinese thermostat housing for the Linhai 250cc - 300cc water cooled engines are used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Cover details:Fits 260cc and 300cc WATER cooled enginesOD of hose connection:..