Taotao ATA125A/A1 Parts

Chinese ATV HeadlightVersion 33This replacement headlight fits several models of Chinese ATVs including TaoTao.  Use the detail pictures and measurements to best match your light.  Also used on some go karts.Headlight details:Black frame"Cat-eye" shaped light3 wire light 3 wire plug [see picture]Light height: 26.5cm [10.4"]Light width: 85mm [3.35"]..

Drive Chain 420 x 78 LinksThis drive chain is used on the Coolster 210 and 213A dirt bikes.  It is also used on 2016 and before Coolster 3050B and 3050C atvs.  The chain is used on many atvs, dirt bikes and Go Karts.  Please check your measurements before ordering.Drive chain measurements are:78 LinksRoller width: 6.25mm [1/4"]Chain Pitch [distance..

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese ATV Gas TankVersion 30This Chinese replacement ATV gas fuel tank for many 4-stroke Chinese  ATVs. This tank fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Tank description:PlasticTank width: 17cm [6.69"]Tank length: 23.5cm [9.25"]Tank height: 19cm [7.48"]Gas line nipple on front bottom of tankCap IncludedPetcock not includedCompati..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 14This Chinese PZ20 hand choke carburetor is the replacement part for many 4-stroke Chinese atvs, dirt bikes, Go Karts and scooters. It fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models. There are a lot of factories in China producing this carburetor and they're not a..

Chinese ATV Front Sprocket - 420-14TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 14T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller14TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese ATV Front Sprocket - 428-13TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 13T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain used on ATVs usually with a 7 inch rear wheel or smaller13TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese Engine Oil FilterThis Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This oil screen fits 50cc - 125cc models.  Filter description:Filter Measurement: 40mm X 45mm approx.Compatible with 50cc-125cc 4 stroke horizontal engines111641  10205A127Known to fit 50cc - 125cc atvs, dirt bikes and m..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese ATV Rim for Taotao ATVs and Go Karts.7x5 - 3 bolt with 10mm bolt holesChinese rim for ATVs and Go Karts that is used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:Overall width: 12.6cm [5"]Overall diameter: 20.0cm [7.875"] Diameter without bead lip: 18..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware.LEFT sideThis is a very popular drum brake / backing plate assembly for ATVs.  Typically used with 6" and 7" tires.  Some earlier versions of this backing plate included a spring attached to the arm.  This backing plate is the replacement for those.  Fits many 110cc and 1..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware. LEFT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware.RIGHT SIDE.This is a very popular drum brake / backing plate assembly for ATVs.  Typically used with 6" and 7" tires.  Some earlier versions of this backing plate included a spring attached to the arm.  This backing plate is the replacement for those.  Fits many 110cc and..

Chinese Drum Brake Assembly with Backing Plate, Shoes and Hardware.Version 06RRiGHT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Brake Rotor Disc - 160mm - 3 and 4 Bolt PatternRotor details:ID of disc: 48mmOD of disc: 160mm3 - 4 bolt patternsBolt pattern 1: 9mm holes #1 Distance: 50mm side to side - 70mm across - center to centerBolt pattern 2: 8mm holes #2 Distance:  58mm side to side - 80mm across - center to centerBolt pattern 3: 8mm holes #3 Distance:  58mm side ..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Chain Adjuster 8mm x 83mmVersion 26Chinese chain adjuster fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This chain adjuster is used with many 110cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:8mm adjuste..

Chinese ATV Rear Disc Brake CaliperVersion 1This rear disc brake caliper fits many Chinese ATVs.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper version 1 details:Mounting Holes: 2.48" center to center [62.5mm]Uses brake pad 4, included (see link to pad below)11931A1085  11931SHOP NOTE: After cha..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Foot Brake Master CylinderVersion 72This Chinese rear brake master cylinder is the replacement part for many Chinese  ATVs. This master cylinder fits many 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Master Cylinder description:RearOverall Length: 19cm [7.48"] AdjustableThreaded M6x1.0 shaft measures 78mm [3.07"] long from body.Mounti..

Chinese Front Brake Cable - 46"Version 46This front brake cable is used on many makes and models of ATVs and dirt bikes. Use the specs below to best match your brake cable.Brake cable details:Overall length: 116.8cm [46"]2.5" slide6mm ball5.5mm x 9.5mm barrelNo adjusterFits Taotao ATA125A ATV.Shipping details:Item(s) will be shipped within 1 busine..

Chinese Dirt Bike Fuel PetcockVersion 1This Chinese fuel petcock is the replacement gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc models.  Petcock description:Overall length: 55.5mm [2.19"]1 mounting hole2 positions Nipple fits 1/4 fuel lineCompatible wit..

Chinese Gas Tank Cap - 36mm Tank - Fill Hole with NotchesVersion 16This Chinese replacement cap for 50cc-250cc scooters, mopeds & ATVs with non-threaded tanks. This is a "push down and twist" type cap.  Depending on when built, an atv could have a threaded tank or a non-threaded tank.  Please check your unit before ordering cap.Cap description:..

Chinese Metal Gas Tank Cap Version 49 BLACKThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Black aluminum with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678  104323Fits the Coleman AT125-EX atv..

Chinese Metal Gas Tank Cap Version 49 BLUEThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Blue with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA11..

Chinese Metal Gas Tank Cap Version 49 REDThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Red with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA110D..

Chinese Metal Gas Tank Cap Version 49 This is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Silver with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Fits the Coleman AT125-EX and AT125-UT atvs.Known ..

Chinese ATV Ignition Key SwitchVersion 5 - Does Not Work On Early Model CoolstersThis Chinese ignition key switch fits many models of ATVs, dirt bikes and Go Karts. See pictures and measurements for best match of the key switch you are needing.Key switch description:4 wire plug [red, green, black, black/white]Pop-in style with two locking tabsFits ..

5-Wire Gear Shift Indicator Sensor / Neutral Safety SwitchThis gear shift indicator is compatible with ATVs and dirt bikes with 5 position engines. Use detail pictures & measurements for matching.  Indicator details:Overall length: 38cm [15"]5 wires6 prong female plug - top middle emptyWire length: 33cm [13"]Indicator has 5 brass spots - 3 of w..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Chinese ATV Rear Sprocket - 420-37TThis rear sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 37T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller37 TeethCenter hole diameter: 48mm [1.89"]Mounting holes: 48mm [1.89"] center to center [side by side]..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Rear Wheel Hub for Chinese ATV or Go KartVersion 48This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 78mm [3.06"] center to ..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..