Taotao ATA135D Parts

Chinese 2-Coil Stator Cover - BLACKA cover for the left side engine.  Cover is used on 110cc - 125cc engines.  Pictures show silver, but you are getting the black version.Stator cover details:BLACKCenter hole diameter: 28.3mm [1.11"]Length at longest point: 21cm [8.27"]Inside measurement of holes: 70mm [2.75"] center to centerAlso known as a left h..

Standard Drive Chain 420This drive chain fits some models of the Taotao DB10, ATA110D/D1, ATA125D, ATA135D and the ATD90A.  Some of these units also used a 428 chain with 90 links, so you need to check before you order. Drive chain measurements are:82 LinksRoller width: 6.25mm [1/4"]Chain Pitch [distance from pin to pin]:  12.70mm [1/2"]Roller diam..

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese ATV Front Sprocket - 428-13TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 13T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain used on ATVs usually with a 7 inch rear wheel or smaller13TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese Engine Oil FilterThis Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This oil screen fits 50cc - 125cc models.  Filter description:Filter Measurement: 40mm X 45mm approx.Compatible with 50cc-125cc 4 stroke horizontal engines111641  10205A127Known to fit 50cc - 125cc atvs, dirt bikes and m..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese ATV Rim for Taotao ATVs and Go Karts. - BLACKREAR 8" X 6.5" - 4 boltChinese rim for Atvs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:BLACKWidth: 167mm  (6.5) InchesDiameter: 230mm  (9.0) InchesCenter hole diameter: 89mm [3.5"]Bolt hole spacing:..

Chinese ATV Rear Rim - SILVER8" X 6.5" - 4 boltChinese rim for kid's ATVs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:SILVER / GRAYWidth: 167mm  (6.5) InchesDiameter: 230mm  (9.0) InchesCenter hole diameter: 89mm  (3.5) Inches Bolt hole spacing: approx..

Chinese Rear Wheel Hub - 125cc-300cc ATVs and Go Karts with 8" and 10" TiresThis rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering. Hub details:4 M10 x 1.50 mounting holesDistance b..

Chinese Rear Wheel Hub with 24 Splines - 125cc-300cc ATVs and Go Karts  This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  Most Tao Motor models prior to 2020 will use a 23 sp..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware. LEFT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Drum Brake Assembly with Backing Plate, Shoes and Hardware.Version 06RRiGHT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Brake Light Switch SpringVersion 58This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Spring details:Spring: 16.5cm [6.5"] overall length [+/- 1mm]13104Also known as the brake sensor switch spring. Known to fit Tao Tao ATA110B, ATA110B1, ATA110D, ATA110D1, ATA125D,..

Chinese ATV Rear Disc Brake CaliperVersion 1This rear disc brake caliper fits many Chinese ATVs.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper version 1 details:Mounting Holes: 2.48" center to center [62.5mm]Uses brake pad 4, included (see link to pad below)11931A1085  11931SHOP NOTE: After cha..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Engine Cap Set for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This Chinese engine / stator cover plug set is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These caps fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Engine housing plugs description:Caps screw into side/top of the engine c..

Chinese Dirt Bike Fuel PetcockVersion 1This Chinese fuel petcock is the replacement gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc models.  Petcock description:Overall length: 55.5mm [2.19"]1 mounting hole2 positions Nipple fits 1/4 fuel lineCompatible wit..

Chinese ATV HeadlightVersion 15This replacement headlight fits several models of Chinese ATVs including TaoTao & Panther.  Use the detail pictures and measurements to best match your light.Headlight details:Sold as eachFits both right and left sides8 LEDs around the outside and a cluster of 6 in the middle3 wires female plugOutside diameter: 68..

3 Wire Gear Shift Indicator / Neutral Safety SwitchIndicator details:3-wires in a 6 position female plug3 contactsOverall length: 37cm [14.5"]10025A27  103038Known to fit the Taotao ATA125D Sport Utility and the ATA135D atvs.  Fits other makes and models as well.  Please look at pictures and descriptions before ordering.Shipping details:Item(s) wil..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Chinese ATV Rear Sprocket - 420-37TThis rear sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 37T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller37 TeethCenter hole diameter: 48mm [1.89"]Mounting holes: 48mm [1.89"] center to center [side by side]..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Spark plug for Chinese ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This NGK (4629) C7HSA spark plug is the replacement part for many 4-stroke Chinese  atvs, dirt bikes, Go Karts and scooters.  It is, by far, the most popular plug for Chinese models.  This plug fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.NGK is the "Gold Standard..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..