TaoTao Motor ATA110D/D1 Parts

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:SilverWidth across the long side is approx.: 81.9mm [3.225"]Width across the short side is approx.: 64mm [2.525"]Comes with gasket4 screw holes in cover110690Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within..

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:82mm x 65mm4 screw holes 111621Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be offered for you. Profess..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:SilverRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCompatib..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This black Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

BLACK Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

Chinese ATV Tail LightVersion 62This replacement tail light fits several models of Chinese ATVs including but not limited to Tao Tao.  Use the detail pictures and measurements to best match your light.  Also used on some go karts.Tail light details:3 wire light 3 wire pigtail [see picture]Light height: 87.75mm [3.45"]Light width: 123.3mm [4.85"]Wir..

Chinese 2-Coil Stator Cover - BLACKA cover for the left side engine.  Cover is used on 110cc - 125cc engines.  Pictures show silver, but you are getting the black version.Stator cover details:BLACKCenter hole diameter: 28.3mm [1.11"]Length at longest point: 21cm [8.27"]Inside measurement of holes: 70mm [2.75"] center to centerAlso known as a left h..

Standard Drive Chain 420This drive chain fits some models of the Taotao DB10, ATA110D/D1, ATA125D, ATA135D and the ATD90A.  Some of these units also used a 428 chain with 90 links, so you need to check before you order. Drive chain measurements are:82 LinksRoller width: 6.25mm [1/4"]Chain Pitch [distance from pin to pin]:  12.70mm [1/2"]Roller diam..

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese ATV Gas TankVersion 30This Chinese replacement ATV gas fuel tank for many 4-stroke Chinese  ATVs. This tank fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Tank description:PlasticTank width: 17cm [6.69"]Tank length: 23.5cm [9.25"]Tank height: 19cm [7.48"]Gas line nipple on front bottom of tankCap IncludedPetcock not includedCompati..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese Timing Cam Chain84 link - 50cc-110cc enginesThis is a timing chain for 50cc-110cc engines.  If you are needing a drive chain this is not the one you are looking for.  This chain is a much smaller chain and is located inside your engine.  Please use specs & pictures to match your chain.TIMING chain details:84 linksPin distance: 6.5mm [.2..

Chinese Timing Chain Tensioner Roller Arm50cc-110cc enginesThis is a timing chain Chain Tensioner Roller Arm for 50cc-110cc engines.  Please use specs & pictures to match your chain.TIMING chain tension arm details:Overall length: 99mm [3.9"]Dowel on end length: 13.85mm [0545"]Dowel on end OD: 10mm [0.395"]Dowel on end ID:  5.1mm [020"]Center h..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 14This Chinese PZ20 hand choke carburetor is the replacement part for many 4-stroke Chinese atvs, dirt bikes, Go Karts and scooters. It fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models. There are a lot of factories in China producing this carburetor and they're not a..

Starter One Way Drive Clutch Gear50cc to 125cc EngineEngine Starter Clutch Gear - This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Gear details:41 tooth gearID of center hole: 19.5mm [.77"] Overall G..

Chinese ATV Front Sprocket - 420-14TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 14T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller14TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese ATV Front Sprocket Chain CoverVersion 3 - BLACKA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:BlackCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to eng..

Chinese ATV Front Sprocket Chain CoverVersion 3 - SILVERA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:SilverCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to e..

Chinese Engine Oil FilterThis Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This oil screen fits 50cc - 125cc models.  Filter description:Filter Measurement: 40mm X 45mm approx.Compatible with 50cc-125cc 4 stroke horizontal engines111641  10205A127Known to fit 50cc - 125cc atvs, dirt bikes and m..

Chinese ATV Stator Cover6-CoilA cover for the left side engine.  Cover is used on 50cc - 125cc engines.Stator cover details:Center hole diameter: 28.3mm [1.11"]Length at longest point: 20cm [8.2"]Inside measurement of holes: 42mm [1.65"] center to centerAlso known as a left hand engine cover104516Known to fit TaoTao ATA110B/B1. ATA110D/D1, ATA125D,..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese ATV Rim for Taotao ATVs and Go Karts.7x5 - 3 bolt with 10mm bolt holesChinese rim for ATVs and Go Karts that is used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:Overall width: 12.6cm [5"]Overall diameter: 20.0cm [7.875"] Diameter without bead lip: 18..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware.LEFT sideThis is a very popular drum brake / backing plate assembly for ATVs.  Typically used with 6" and 7" tires.  Some earlier versions of this backing plate included a spring attached to the arm.  This backing plate is the replacement for those.  Fits many 110cc and 1..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware. LEFT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware.RIGHT SIDE.This is a very popular drum brake / backing plate assembly for ATVs.  Typically used with 6" and 7" tires.  Some earlier versions of this backing plate included a spring attached to the arm.  This backing plate is the replacement for those.  Fits many 110cc and..

Chinese Drum Brake Assembly with Backing Plate, Shoes and Hardware.Version 06RRiGHT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Brake Rotor Disc - 160mm - 3 and 4 Bolt PatternRotor details:ID of disc: 48mmOD of disc: 160mm3 - 4 bolt patternsBolt pattern 1: 9mm holes #1 Distance: 50mm side to side - 70mm across - center to centerBolt pattern 2: 8mm holes #2 Distance:  58mm side to side - 80mm across - center to centerBolt pattern 3: 8mm holes #3 Distance:  58mm side ..

Chinese Brake Shoes for 110mm ID DrumVersion 303These brake shoes are for the 50cc to 150cc Chinese ATVs, scooters, mopeds & dirt bikes. Please use detail pictures & measurements to make sure these will fit your machine.Shoe details:Diameter: 105mm when held togetherDiameter: 109mm when mountedHeight: 100mmWidth: 25mmFits 110mm [4.33"] brak..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Chain Adjuster 8mm x 83mmVersion 26Chinese chain adjuster fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This chain adjuster is used with many 110cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:8mm adjuste..

Chinese Brake Light Switch SpringVersion 58This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Spring details:Spring: 16.5cm [6.5"] overall length [+/- 1mm]13104Also known as the brake sensor switch spring. Known to fit Tao Tao ATA110B, ATA110B1, ATA110D, ATA110D1, ATA125D,..

Chinese ATV Rear Disc Brake CaliperVersion 1This rear disc brake caliper fits many Chinese ATVs.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper version 1 details:Mounting Holes: 2.48" center to center [62.5mm]Uses brake pad 4, included (see link to pad below)11931A1085  11931SHOP NOTE: After cha..

Chinese Brake Light SwitchVersion 7This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Switch details:Overall length: 38cm [15"] including prongsScrew/nut on style.2 wire with pin connectorsSwitch length: 58mm [2.28"]Switch diameter: 11mm [.44"]102128  10442A2510Also known ..

Chinese ATV Clutch - 17 Teeth - 50cc to 125ccVersion 1Clutch assembly (#01) is replacement clutch for most 50cc-125cc full automatic transmission BUT not all. Chinese manufactured brands and models. Very popular in smaller ATVs.Clutch details:Rear clutch for 50-110cc engine17 tooth basket - 6 tooth spline inner - 24 tooth on outerSpline hole diamet..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Left Crankshaft Cover for 50cc to 125cc Automatic Transmission WITH OUT ReverseThis Chinese crankshaft cover is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. It fits automatics that don't have a reverse gear of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover description:Overall dimensions:..

Chinese Engine Cap Set for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This Chinese engine / stator cover plug set is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These caps fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Engine housing plugs description:Caps screw into side/top of the engine c..

Chinese Foot Brake Master CylinderVersion 72This Chinese rear brake master cylinder is the replacement part for many Chinese  ATVs. This master cylinder fits many 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Master Cylinder description:RearOverall Length: 19cm [7.48"] AdjustableThreaded M6x1.0 shaft measures 78mm [3.07"] long from body.Mounti..

Chinese Dirt Bike Fuel PetcockVersion 1This Chinese fuel petcock is the replacement gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc models.  Petcock description:Overall length: 55.5mm [2.19"]1 mounting hole2 positions Nipple fits 1/4 fuel lineCompatible wit..

Chinese Gas Tank Cap - 36mm Tank - Fill Hole with NotchesVersion 16This Chinese replacement cap for 50cc-250cc scooters, mopeds & ATVs with non-threaded tanks. This is a "push down and twist" type cap.  Depending on when built, an atv could have a threaded tank or a non-threaded tank.  Please check your unit before ordering cap.Cap description:..

Chinese Metal Gas Tank Cap Version 49 BLACKThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Black aluminum with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678  104323Fits the Coleman AT125-EX atv..

Chinese Metal Gas Tank Cap Version 49 BLUEThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Blue with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA11..

Chinese Metal Gas Tank Cap Version 49 REDThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Red with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA110D..

Chinese Metal Gas Tank Cap Version 49 This is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Silver with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Fits the Coleman AT125-EX and AT125-UT atvs.Known ..

27" Handlebar  Handlebar details:Black27" wide7/8" diameter bar2 small holes on left underside of bar104637OE handlebars for TaoTao ATA110B/B1, ATA110D/D1, BoulderB1, Cheetah, New Cheetah and Rover 500.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will..

Chinese ATV HeadlightVersion 15This replacement headlight fits several models of Chinese ATVs including TaoTao & Panther.  Use the detail pictures and measurements to best match your light.Headlight details:Sold as eachFits both right and left sides8 LEDs around the outside and a cluster of 6 in the middle3 wires female plugOutside diameter: 68..

Ignition Coil with 90° Metal Spark Plug CapThis ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Ignition coil description:Overall length: 46cm [18"]90° metal cap2 prong - green and black terminalsBlack is neutralGreen is input from your cdi101008  12910A16212Fits the Coleman AT110 Husky, A..

Ignition Coil with 90° Metal Spark Plug Cap - 25 Inches LongThis ignition coil is a little longer than our standard version 41.  If you need another seven inches of reach, this should solve your problem  This ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Please look at pictures and descr..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Chinese ATV Rear Sprocket - 420-37TThis rear sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 37T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller37 TeethCenter hole diameter: 48mm [1.89"]Mounting holes: 48mm [1.89"] center to center [side by side]..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Rear Wheel Hub for Chinese ATV or Go KartVersion 49This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 69mm [2.7"] center-to-c..

Rear Wheel Hub for Chinese ATV or Go KartVersion 48This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 78mm [3.06"] center to ..

Spark plug for Chinese ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This NGK (4629) C7HSA spark plug is the replacement part for many 4-stroke Chinese  atvs, dirt bikes, Go Karts and scooters.  It is, by far, the most popular plug for Chinese models.  This plug fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.NGK is the "Gold Standard..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..

Chinese Throttle Cable for ATVs.Version 4This Chinese throttle cable is the replacement part for many 4-stroke Chinese  ATVs. This cable fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Please check measurement before ordering.Cable description:30" over all lengthHousing length: 25 15/16"Slide (throw) length: 8.0cm (3") +/- (1/4'')Cable is s..

Chinese 4-Pin Voltage Regulator.Version 15This Chinese voltage regulator is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This regulator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Voltage regulator description:4-pin [plug as pictured]Overall length: 67mm [2.6"]Length of metal area: 55mm [2.1"]..