TaoTao Motor BULL 150 Parts

Chinese ATV Gas TankVersion 50This Chinese replacement ATV gas fuel tank for many 4-stroke Chinese  ATVs. This tank fits 110cc, 125cc, 150cc, 200cc, and 250cc models.  This tank uses a push down and turn cap.  Our fuel tank version #53 is exactly the same except it uses a threaded fuel cap.  Tank description:MetalTank width: 22.5cm [9"] including l..

Chinese ATV Tail LightVersion 62This replacement tail light fits several models of Chinese ATVs including but not limited to Tao Tao.  Use the detail pictures and measurements to best match your light.  Also used on some go karts.Tail light details:3 wire light 3 wire pigtail [see picture]Light height: 87.75mm [3.45"]Light width: 123.3mm [4.85"]Wir..

Chinese Drive Chain Tensioner AdjusterVersion 36Chinese drive chain tensioner fits 110cc-250cc models of ATVs. This chain adjuster is used with several Taotao models. Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:Tensioner with springOverall length: 100mm [3.93"]Arm hole ID..

Chinese 6 Pin CDIVersion 14Chinese 6 pin dual plug CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many size engines require this CDI, including 110cc to 150cc.  Verify the number of pins and style of plug for best match of your CDI.CDI description:6-pin [4 prong + 2 prong]Square dual plug [as pictured]65mm long ..

Chinese Ignition CoilVersion 13 This Chinese ignition coil is replacement coil for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This coil fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc and 200cc models.  Ignition coil description:Bracket length: 73mm [2.87"]Overall length: 457mm [18"]12 volt2 bolt holes with ground prongBolt h..

Chinese Disc Brake Pad Set for ATVVersion 111This Chinese brake pad set is the replacement front pad for many Chinese atvs. These brake pads fits 110cc, 125cc, 150cc and 200cc models.  They do fit the Tao Motor ATA125F1, ATA150G, BULL 150, RAPTOR 200 and the RHINO 250 atvs.Larger pad details:8.5mm round mounting holesRectangular tab in middleOveral..

Gear Indicator Lights - Neutral and ReverseGear Indicator set for many makes and models of Chinese Atv's.  Fits a 5/8 inch opening.Light specs:Red and green lamp included2-wire17" pigtail102766Known to fit Tao Tao ATA125D, ATA125F, ATA150G, Bull 150, Cheetah and Rhino 250.Shipping details:Item(s) will be shipped within 1 business days once you fini..

Chinese Rear Wheel Hub - 125cc-300cc ATVs and Go Karts with 8" and 10" TiresThis rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering. Hub details:4 M10 x 1.50 mounting holesDistance b..

Chinese Rear Wheel Hub with 24 Splines - 125cc-300cc ATVs and Go Karts  This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  Most Tao Motor models prior to 2020 will use a 23 sp..

Gates Powerlink CVT Drive BeltGates Powerlink CVT PL30707 premium drive belt fits many 4-stroke models of ATVs, go karts, scooters, and mopeds. This belt is specially designed for a variety of  motorized CVT applications.Belt description:CVT [-Continuous Variable Transmission-]Fits 125cc-150cc Scooters, Mopeds, Go Karts, CVT ATVsPremium version of ..

Gates Powerlink CVT Drive BeltGates Powerlink CVT PL30705 premium drive belt fits many 4-stroke models of ATVs, go karts, scooters, and mopeds. This belt is specially designed for a variety of  motorized CVT applications.Belt description:CVT [-Continuous Variable Transmission-]835-20-30 Length: 835mm / 32.874"Width: 20mm / .787"Premium version of P..

Chinese Brake Rotor Disc - 186mm - 4 Bolt PatternChinese Brake Rotor for 110cc and 150cc ATVs.  Fits many makes and models.  Please use pictures and descriptions to make sure you have the right one.ID of disc: 36mm [1.42"]OD of disc: 186mm [7.24"]Thickness: 4mm4 bolt pattern Mounting hole size: 8.6mm [.34"]Bolt hole distance: 56mm [2.2"] across cen..

Chinese Brake Light Switch SpringVersion 58This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Spring details:Spring: 16.5cm [6.5"] overall length [+/- 1mm]13104Also known as the brake sensor switch spring. Known to fit Tao Tao ATA110B, ATA110B1, ATA110D, ATA110D1, ATA125D,..

Chinese Brake Light SwitchVersion 7This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Switch details:Overall length: 38cm [15"] including prongsScrew/nut on style.2 wire with pin connectorsSwitch length: 58mm [2.28"]Switch diameter: 11mm [.44"]102128  10442A2510Also known ..

Chinese Clutch - 19 Spline - GY6 125cc 150ccVersion 9Clutch assembly (#09) is replacement clutch for GY6 150cc Chinese manufactured brands and models. Very popular in go karts & scooters. Used in some ATVs.Clutch details:Rear clutch for GY6 150 engine19 splines inside the clutch drum/bellOD of bell: 136.4mm [5.37"]ID of bell: 125mm [4.91"]ID of..

Rear Brake Master Cylinder with ReservoirVersion 995This Chinese rear brake master cylinder is the replacement part for many Chinese  atvs and Go Karts. This master cylinder fits many makes and models.  Master Cylinder description:Rear6mm mounting holesMounting hole distance: 45mm [1.77"] center-to-center apart9 inches of hose between master cylind..

Chinese Dirt Bike Fuel PetcockVersion 1This Chinese fuel petcock is the replacement gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc models.  Petcock description:Overall length: 55.5mm [2.19"]1 mounting hole2 positions Nipple fits 1/4 fuel lineCompatible wit..

Chinese Metal Gas Tank Cap Version 49 BLACKThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Black aluminum with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678  104323Fits the Coleman AT125-EX atv..

Chinese Metal Gas Tank Cap Version 49 BLUEThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Blue with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA11..

Chinese Metal Gas Tank Cap Version 49 REDThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Red with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA110D..

Chinese Metal Gas Tank Cap Version 49 This is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Silver with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Fits the Coleman AT125-EX and AT125-UT atvs.Known ..

Chinese GY6 125cc 150cc 170cc Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits GY6 125cc and 150cc engine models.  Pump description:Overall diameter: 46.85mm (1.85")Overall height: 20.5mm (.81") with the threaded bolt removedThreaded bolt length: 31.7mm [..

Chinese PD24J Carburetor with Electric Choke for GY6 125cc and 150cc Scooters, ATVs and Go Karts.Version 6Carburetor details:PD24JElectric choke with male 2-wire plugIntake side inner diameter: 24mmIntake side outer diameter: 32mmAir filter side inner diameter: 38mmAir filter side outer diameter: 42mmCompatible with GY6 150cc 4 strokeFuel drain com..

Chinese Front Drive Variator Clutch AssemblyGY6 125cc 150cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diameter: 11.5c..

Chinese GY6 125cc 150cc Intake Manifold 22 mm IDVersion 16Chinese intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many GY6 125cc and 150cc engines use this intake manifold. Check pictures and measurements to verify this one will fit your machine/engine.Manifold description:Mounting hole distance: 45mm..

Chinese Intake Manifold Gasket for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese intake manifold gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These gaskets are used for the intake to engine and intake to carburetor of GY6 125cc and 150cc engines.  Gasket description:Intake to engine gaske..

Chinese Engine Oil Pump Chain / Starting Chain for GY6 125cc 150ccThis Chinese oil pump chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits GY6 125cc and 150cc engine models.  Chain description:22 links [44 if you count pins]Pin distance: 6mmCompatible with GY6 125cc, 150cc 4 stroke101651..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go KartsVersion 2This Chinese starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits GY6 125cc, 150cc, 170cc and 200cc models.  Starter description:Space of mounting holes: 78mm [3.07"]132mm overall length [5.2"]Spline length: 19..

Chinese Starter Clutch AssemblyGY6 125cc 150cc EngineEngine Starter Clutch Assembly - GY6 125cc and 150cc ATVs, Dirt Bikes, Scooters. This style engine is identified by the CVT belt cover on the left side of engine. This air cooled scooter engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi..

Chinese Cooling Fan CoverThe Chinese fan cover for the GY6 125cc and 150cc air cooled engine used in several makes and models of ATVs, scooters, mopeds, and go karts. Please use detailed pictures and measurements for best match for your machine.Cover details:Fits 125cc and 150cc air cooled engineMounting holes spacing: 180mm [7"] center to centerTh..

Bottom Shroud for GY6 150cc Auto w/ Reverse EngineThis engine shroud is used on several makes and models of ATVs, Go Karts and scooters with 150cc GY6 engines.  Please check pictures and descriptions before ordering.Shroud specs:Overall measurements: 9.25" x 6.5" x 3"Black plasticFits GY6 150cc automatic with reverse engines601060  BD75Known to fit..

Oil Pump Drive Gear - GY6 150cc EngineThis Chinese oil pump chain drive gear is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gear fits GY6 125cc and 150cc engine models.  Pump description:23 toothOverall diameter: 44.2mm (1.75")Overall thickness of gear: 2.75mm [.10"]Compatible with GY6 125cc, 150cc ..

Chinese Engine Oil DipstickVersion 3This Chinese dipstick is the replacement part for many 4-stroke Chinese  ATVs, Go- Karts and Scooters. This dipstick fits 50cc and 150cc models.  Dipstick description:Overall length: 115mm [4.52"]Cap diameter: 29.4mm (1.16")Threads: M20*2.50Includes o-ringCompatible with 50cc and 150cc GY6 150cc 4 stroke101381Kno..

Chinese ATV Ignition Key SwitchVersion 4This Chinese ignition key switch fits many models of ATVs, dirt bikes, scooters, mopeds, and go karts.  See pictures and measurements to best match your switch.Key switch description:4 wire male plug [red, green, black, black/white]Pop-in style with two locking tabsFits hole approx. 25.4mm [1"]Wire length: 20..

4-Hole Rear Brake Disc Hub with 28 SplinesUsed to secure the brake rotor disc to the axle.This rear sprocket hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:28 splines4 threaded ..

Chinese ATV Rear Sprocket - 428-40TThis rear sprocket is used on the Chinese 125cc-250cc engines.  This sprocket has 40T and is compatible with the 428 chain ONLY.  Fits all Taotao 200cc and 250cc ATVs. Sprocket details:#428 chain 40 TeethCenter hole diameter: 36mm [1.42"](6) 8mm x 1.25 threaded bolt holes for mountingMounting holes distance: 28mm ..

Chinese ATV Rear Sprocket - 530-32TThis rear sprocket is used on the Chinese 150cc-250cc engines.  This sprocket has 32T and is compatible with the 530 chain ONLY.  Sprocket details:#530 chain 32 TeethCenter hole diameter: 35mm Mounting holes distance: 27mmOverall diameter: 168mm10339A1915  101594Be sure to measure your chain or current sprocket be..

Rear Sprocket Hub for Chinese 110cc, 150cc and 250cc ATVs This rear Sprocket hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:6 mounting holesDistance between holes: 28mm [1.1"] c..

Chinese 4-Pin Voltage Regulator.Version 15This Chinese voltage regulator is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This regulator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Voltage regulator description:4-pin [plug as pictured]Overall length: 67mm [2.6"]Length of metal area: 55mm [2.1"]..