TaoTao Motor CHEETAH Parts

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:SilverWidth across the long side is approx.: 81.9mm [3.225"]Width across the short side is approx.: 64mm [2.525"]Comes with gasket4 screw holes in cover110690Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within..

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:82mm x 65mm4 screw holes 111621Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be offered for you. Profess..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:SilverRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCompatib..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This black Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

BLACK Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

Chinese ATV Tail LightVersion 62This replacement tail light fits several models of Chinese ATVs including but not limited to Tao Tao.  Use the detail pictures and measurements to best match your light.  Also used on some go karts.Tail light details:3 wire light 3 wire pigtail [see picture]Light height: 87.75mm [3.45"]Light width: 123.3mm [4.85"]Wir..

Chinese 2-Coil Stator Cover - BLACKA cover for the left side engine.  Cover is used on 110cc - 125cc engines.  Pictures show silver, but you are getting the black version.Stator cover details:BLACKCenter hole diameter: 28.3mm [1.11"]Length at longest point: 21cm [8.27"]Inside measurement of holes: 70mm [2.75"] center to centerAlso known as a left h..

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese Timing Cam Chain84 link - 50cc-110cc enginesThis is a timing chain for 50cc-110cc engines.  If you are needing a drive chain this is not the one you are looking for.  This chain is a much smaller chain and is located inside your engine.  Please use specs & pictures to match your chain.TIMING chain details:84 linksPin distance: 6.5mm [.2..

Chinese Timing Chain Tensioner Roller Arm50cc-110cc enginesThis is a timing chain Chain Tensioner Roller Arm for 50cc-110cc engines.  Please use specs & pictures to match your chain.TIMING chain tension arm details:Overall length: 99mm [3.9"]Dowel on end length: 13.85mm [0545"]Dowel on end OD: 10mm [0.395"]Dowel on end ID:  5.1mm [020"]Center h..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 14This Chinese PZ20 hand choke carburetor is the replacement part for many 4-stroke Chinese atvs, dirt bikes, Go Karts and scooters. It fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models. There are a lot of factories in China producing this carburetor and they're not a..

Starter One Way Drive Clutch Gear50cc to 125cc EngineEngine Starter Clutch Gear - This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Gear details:41 tooth gearID of center hole: 19.5mm [.77"] Overall G..

Chinese ATV Front Sprocket - 428-13TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 13T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain used on ATVs usually with a 7 inch rear wheel or smaller13TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese ATV Front Sprocket Chain CoverVersion 3 - BLACKA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:BlackCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to eng..

Chinese ATV Front Sprocket Chain CoverVersion 3 - SILVERA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:SilverCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to e..

Chinese Engine Oil FilterThis Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This oil screen fits 50cc - 125cc models.  Filter description:Filter Measurement: 40mm X 45mm approx.Compatible with 50cc-125cc 4 stroke horizontal engines111641  10205A127Known to fit 50cc - 125cc atvs, dirt bikes and m..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese ATV Rim for Taotao ATVs and Go Karts.FRONT 8" X 5.25" - 4 boltChinese rim for Atvs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:Overall width: 136mm [5.35"]Overall diameter: 230mm [9.0"] Diameter without bead lip: 203mm [8.0"]Center hole diamete..

Chinese ATV Rim for Taotao ATVs and Go Karts.FRONT 8" X 5.25" - 4 boltChinese rim for kid's ATVs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:SilverOverall width: 136mm [5.35"]Overall diameter: 230mm [9.0"]Diameter without bead lip: 203mm [8.0"]Center h..

Chinese ATV Rim for Taotao ATVs and Go Karts. - BLACKREAR 8" X 6.5" - 4 boltChinese rim for Atvs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:BLACKWidth: 167mm  (6.5) InchesDiameter: 230mm  (9.0) InchesCenter hole diameter: 89mm [3.5"]Bolt hole spacing:..

Chinese ATV Rear Rim - SILVER8" X 6.5" - 4 boltChinese rim for kid's ATVs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:SILVER / GRAYWidth: 167mm  (6.5) InchesDiameter: 230mm  (9.0) InchesCenter hole diameter: 89mm  (3.5) Inches Bolt hole spacing: approx..

Gear Indicator Lights - Neutral and ReverseGear Indicator set for many makes and models of Chinese Atv's.  Fits a 5/8 inch opening.Light specs:Red and green lamp included2-wire17" pigtail102766Known to fit Tao Tao ATA125D, ATA125F, ATA150G, Bull 150, Cheetah and Rhino 250.Shipping details:Item(s) will be shipped within 1 business days once you fini..

Chinese Rear Wheel Hub - 125cc-300cc ATVs and Go Karts with 8" and 10" TiresThis rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering. Hub details:4 M10 x 1.50 mounting holesDistance b..

Chinese Rear Wheel Hub with 24 Splines - 125cc-300cc ATVs and Go Karts  This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  Most Tao Motor models prior to 2020 will use a 23 sp..

Chinese Drum Brake Assembly.  Complete with backing plate, shoes and hardware. LEFT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Drum Brake Assembly with Backing Plate, Shoes and Hardware.Version 06RRiGHT side.Backing plate details:Backing plate diameter: 104.5mm [4.12"]Center hole inside diameter: 19.6mm [.77"]Brake shoes have "V" shaped springArm has return springFits Coleman AT110 Husky atv.Fits Tao Tao ATA110D, ATA110D1, ATA110F, ATA110F1, ATA110H, ATA125A, ATA12..

Chinese Brake Rotor Disc - 190mm - 4 Bolt PatternChinese Brake Rotor for 110cc and 150cc ATVs.  Fits many makes and models.  Please use pictures and descriptions to make sure you have the right one.ID of disc: 51mm [2.0"]OD of disc: 190mm [7.48"]Thickness: 3.7mm4 bolt pattern Bolt hole size: 8.6mm [.34"]Bolt hole distance: 68mm [2.7"] across center..

Chinese Brake Shoes for 110mm ID DrumVersion 303These brake shoes are for the 50cc to 150cc Chinese ATVs, scooters, mopeds & dirt bikes. Please use detail pictures & measurements to make sure these will fit your machine.Shoe details:Diameter: 105mm when held togetherDiameter: 109mm when mountedHeight: 100mmWidth: 25mmFits 110mm [4.33"] brak..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Chain Adjuster 8mm x 83mmVersion 26Chinese chain adjuster fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This chain adjuster is used with many 110cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:8mm adjuste..

Chinese Brake Light Switch SpringVersion 58This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Spring details:Spring: 16.5cm [6.5"] overall length [+/- 1mm]13104Also known as the brake sensor switch spring. Known to fit Tao Tao ATA110B, ATA110B1, ATA110D, ATA110D1, ATA125D,..

Chinese ATV Rear Disc Brake CaliperVersion 1This rear disc brake caliper fits many Chinese ATVs.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper version 1 details:Mounting Holes: 2.48" center to center [62.5mm]Uses brake pad 4, included (see link to pad below)11931A1085  11931SHOP NOTE: After cha..

Chinese Brake Light SwitchVersion 7This brake light switch is commonly used on Chinese GY6 50cc-250cc ATVs but have been known to be used on many other machines.  Switch details:Overall length: 38cm [15"] including prongsScrew/nut on style.2 wire with pin connectorsSwitch length: 58mm [2.28"]Switch diameter: 11mm [.44"]102128  10442A2510Also known ..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Clutch Assembly - Version 27 - Tao Tao ATA125D Version 27Clutch assembly (#27) is the replacement clutch for several Taotao ATVs and dirt bikes.  Also fits other 110cc-125cc full-automatic units.Clutch details:Solid caseThe smallest gear has 6 splines.The outside case has 16 tabs and a large snap ring that hold it all together.ID: 15mm peak..

Chinese Engine Cap Set for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This Chinese engine / stator cover plug set is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These caps fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Engine housing plugs description:Caps screw into side/top of the engine c..

Chinese Foot Brake Master CylinderVersion 72This Chinese rear brake master cylinder is the replacement part for many Chinese  ATVs. This master cylinder fits many 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Master Cylinder description:RearOverall Length: 19cm [7.48"] AdjustableThreaded M6x1.0 shaft measures 78mm [3.07"] long from body.Mounti..

Chinese Dirt Bike Fuel PetcockVersion 1This Chinese fuel petcock is the replacement gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, 150cc models.  Petcock description:Overall length: 55.5mm [2.19"]1 mounting hole2 positions Nipple fits 1/4 fuel lineCompatible wit..

Chinese Metal Gas Tank Cap Version 49 BLACKThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Black aluminum with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678  104323Fits the Coleman AT125-EX atv..

Chinese Metal Gas Tank Cap Version 49 BLUEThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Blue with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA11..

Chinese Metal Gas Tank Cap Version 49 REDThis is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Red with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Known to fit Tao Tao ATA110B/B1, ATA110B3, ATA110D..

Chinese Metal Gas Tank Cap Version 49 This is a Chinese aluminum replacement cap for ATVs and Go Karts. This cap fits fuel tank versions 2 & 49 as well as many other makes and models.  Cap description:Silver with scalloped edge Cap width: 79mm [3.112"]Cap ID: 40mm [1.57"]Rubber seal inside101678Fits the Coleman AT125-EX and AT125-UT atvs.Known ..

27" Handlebar  Handlebar details:Black27" wide7/8" diameter bar2 small holes on left underside of bar104637OE handlebars for TaoTao ATA110B/B1, ATA110D/D1, BoulderB1, Cheetah, New Cheetah and Rover 500.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will..

Ignition Coil with 90° Metal Spark Plug CapThis ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Ignition coil description:Overall length: 46cm [18"]90° metal cap2 prong - green and black terminalsBlack is neutralGreen is input from your cdi101008  12910A16212Fits the Coleman AT110 Husky, A..

Ignition Coil with 90° Metal Spark Plug Cap - 25 Inches LongThis ignition coil is a little longer than our standard version 41.  If you need another seven inches of reach, this should solve your problem  This ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Please look at pictures and descr..

Chinese ATV Ignition Key SwitchVersion 5 - Does Not Work On Early Model CoolstersThis Chinese ignition key switch fits many models of ATVs, dirt bikes and Go Karts. See pictures and measurements for best match of the key switch you are needing.Key switch description:4 wire plug [red, green, black, black/white]Pop-in style with two locking tabsFits ..

5-Wire Gear Shift Indicator Sensor / Neutral Safety SwitchThis gear shift indicator is compatible with ATVs and dirt bikes with 5 position engines. Use detail pictures & measurements for matching.  Indicator details:Overall length: 38cm [15"]5 wires6 prong female plug - top middle emptyWire length: 33cm [13"]Indicator has 5 brass spots - 3 of w..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Chinese ATV Rear Sprocket - 428-41TThis rear sprocket is used on Chinese atvs and Go Karts.  It has 41 teeth and is compatible with 428 chain ONLY.  Please check specs before ordering. Sprocket details:#428 chain 41 TeethCenter hole diameter: 48mm [1.89"](4) 8.8mm [.34"] bolt holes for mountingMounting holes distance: 47mm [1.85"] center-to-center ..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Rear Sprocket Hub - 4 Hole - 32 SplineThis hub is used on several makes and models of Chinese Go Karts and atvs.   It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole..

Spark plug for Chinese ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This NGK (4629) C7HSA spark plug is the replacement part for many 4-stroke Chinese  atvs, dirt bikes, Go Karts and scooters.  It is, by far, the most popular plug for Chinese models.  This plug fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.NGK is the "Gold Standard..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..

Starter Relay Solenoid for Chinese EnginesVersion 21This starter relay solenoid fits many Chinese models of ATVs, scooters, mopeds, dirt bikes, and go karts.  Solenoid fits many engine sizes including, but not limited to, 150cc, 200cc, and 250cc.Starter relay solenoid description:2 wire male plug [see picture]8 inch pigtailCompatible with 50cc to 2..

Chinese 4-Pin Voltage Regulator.Version 15This Chinese voltage regulator is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This regulator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Voltage regulator description:4-pin [plug as pictured]Overall length: 67mm [2.6"]Length of metal area: 55mm [2.1"]..