Taotao REX Parts

Chinese ATV Front Sprocket Chain CoverVersion 3 - BLACKA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:BlackCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to eng..

Chinese ATV Front Sprocket Chain CoverVersion 3 - SILVERA common left back engine cover that is used to cover the chain and sprocket area on most 50cc-125cc Chinese ATV engines.Chain cover details:SilverCover width next to engine: 12.5cm [5"]Length at longest point: 12cm [4.72"]Mounting holes center to center: 12.1cm [4.75"]Contoured edge next to e..

Chinese Rear Wheel Hub - 125cc-300cc ATVs and Go Karts with 8" and 10" TiresThis rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering. Hub details:4 M10 x 1.50 mounting holesDistance b..

Chinese Rear Wheel Hub with 24 Splines - 125cc-300cc ATVs and Go Karts  This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  Most Tao Motor models prior to 2020 will use a 23 sp..

Chinese ATV Rear ReflectorThis replacement reflector fits several models of Chinese ATVs including but not limited to Kazuma Meerkat 50cc.  Use the detail pictures and measurements to best match your reflector. Reflector details:Red lensReflector height: 35mm Reflector width: 89mm 6mm*1.00 mounting stud located in center of back of reflector.Does n..

Chinese Brake Rotor Disc - 190mm - 4 Bolt PatternChinese Brake Rotor for 110cc and 150cc ATVs.  Fits many makes and models.  Please use pictures and descriptions to make sure you have the right one.ID of disc: 51mm [2.0"]OD of disc: 190mm [7.48"]Thickness: 3.7mm4 bolt pattern Bolt hole size: 8.6mm [.34"]Bolt hole distance: 68mm [2.7"] across center..

Chinese Brake Shoes for 110mm ID DrumVersion 303These brake shoes are for the 50cc to 150cc Chinese ATVs, scooters, mopeds & dirt bikes. Please use detail pictures & measurements to make sure these will fit your machine.Shoe details:Diameter: 105mm when held togetherDiameter: 109mm when mountedHeight: 100mmWidth: 25mmFits 110mm [4.33"] brak..

Chinese Chain Adjuster 8mm x 83mmVersion 26Chinese chain adjuster fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This chain adjuster is used with many 110cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:8mm adjuste..

Front 12.4" Adjustable Shock AbsorberThis Chinese 12.4" FRONT adjustable shock fits the TaoTao RAPTOR and REX atvs.  It may work on other atvs too.  Please check pictures and specs before ordering.Shock specs:Overall Length: 345mm [13.58"]Distance between mounting holes: 315mm [12.4"]5 different adjustment settings10mm [.40"] mounting holeMounting ..

Chinese ATV Rear Sprocket - 428-45TThis rear sprocket is used on the Chinese 125cc-250cc engines.  This sprocket has 45T and is compatible with the 428 chain ONLY.   Please check pictures and description before ordering. Sprocket details:#428 chain 45 TeethCenter hole diameter: 48mm [1.88"]Mounting holes distance: 48mm [1.88"]Overall diameter: 186m..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Chinese 4-Pin Voltage Regulator.Version 15This Chinese voltage regulator is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This regulator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Voltage regulator description:4-pin [plug as pictured]Overall length: 67mm [2.6"]Length of metal area: 55mm [2.1"]..