Taotao Tonga 110 Big Wheel Parts

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese ATV Gas TankVersion 30This Chinese replacement ATV gas fuel tank for many 4-stroke Chinese  ATVs. This tank fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Tank description:PlasticTank width: 17cm [6.69"]Tank length: 23.5cm [9.25"]Tank height: 19cm [7.48"]Gas line nipple on front bottom of tankCap IncludedPetcock not includedCompati..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 14This Chinese PZ20 hand choke carburetor is the replacement part for many 4-stroke Chinese atvs, dirt bikes, Go Karts and scooters. It fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models. There are a lot of factories in China producing this carburetor and they're not a..

Chinese ATV Front Sprocket - 420-14TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 14T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller14TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese Brake Rotor Disc - 160mm - 3 and 4 Bolt PatternRotor details:ID of disc: 48mmOD of disc: 160mm3 - 4 bolt patternsBolt pattern 1: 9mm holes #1 Distance: 50mm side to side - 70mm across - center to centerBolt pattern 2: 8mm holes #2 Distance:  58mm side to side - 80mm across - center to centerBolt pattern 3: 8mm holes #3 Distance:  58mm side ..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Chain Adjuster 8mm x 83mmVersion 26Chinese chain adjuster fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. This chain adjuster is used with many 110cc-250cc ATVs and dirt bikes.  Check pictures and measurements to verify if this adjuster is the correct application for your model.Adjuster description:8mm adjuste..

Chinese ATV Rear Disc Brake CaliperVersion 1This rear disc brake caliper fits many Chinese ATVs.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper version 1 details:Mounting Holes: 2.48" center to center [62.5mm]Uses brake pad 4, included (see link to pad below)11931A1085  11931SHOP NOTE: After cha..

Chinese Foot Brake Master CylinderVersion 72This Chinese rear brake master cylinder is the replacement part for many Chinese  ATVs. This master cylinder fits many 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Master Cylinder description:RearOverall Length: 19cm [7.48"] AdjustableThreaded M6x1.0 shaft measures 78mm [3.07"] long from body.Mounti..

Chinese ATV Ignition Key SwitchVersion 5 - Does Not Work On Early Model CoolstersThis Chinese ignition key switch fits many models of ATVs, dirt bikes and Go Karts. See pictures and measurements for best match of the key switch you are needing.Key switch description:4 wire plug [red, green, black, black/white]Pop-in style with two locking tabsFits ..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Chinese ATV Rear Sprocket - 420-37TThis rear sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 37T and is compatible with the 420 chain ONLY.  Sprocket details:#420 chain used on ATVs usually with a 7 inch rear wheel or smaller37 TeethCenter hole diameter: 48mm [1.89"]Mounting holes: 48mm [1.89"] center to center [side by side]..

Rear Wheel Hub for Chinese ATV or Go KartVersion 48This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 78mm [3.06"] center to ..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..