TaoTao Motor ATK125A Parts

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:SilverWidth across the long side is approx.: 81.9mm [3.225"]Width across the short side is approx.: 64mm [2.525"]Comes with gasket4 screw holes in cover110690Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within..

Engine Rocker Arm Cover for 110cc and 125cc EngineCover details:82mm x 65mm4 screw holes 111621Known to fit many Taotao 110cc & 125cc ATV's and many other makes and models.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be offered for you. Profess..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:SilverRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCompatib..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This black Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

BLACK Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

Chinese 2-Coil Stator Cover - BLACKA cover for the left side engine.  Cover is used on 110cc - 125cc engines.  Pictures show silver, but you are getting the black version.Stator cover details:BLACKCenter hole diameter: 28.3mm [1.11"]Length at longest point: 21cm [8.27"]Inside measurement of holes: 70mm [2.75"] center to centerAlso known as a left h..

Chinese ATV / Go Kart HeadlightThis replacement headlight fits several models of Chinese Go Karts.  Use the detail pictures and measurements to best match your light.  Also used on some ATVs.Headlight details:2 wire light - orange & green2 pin plug [see picture]Light height: 103.5mm [4"]Light length: 88mm [3.46"]Wire length: 48cm [18.89"]Mounti..

Chinese 6 Pin CDIVersion 14Chinese 6 pin dual plug CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many size engines require this CDI, including 110cc to 150cc.  Verify the number of pins and style of plug for best match of your CDI.CDI description:6-pin [4 prong + 2 prong]Square dual plug [as pictured]65mm long ..

Chinese 5 Pin CDIVersion 3Very popular Chinese 5 pin CDI fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds.  Many engines require this CDI, including 50cc to 125cc.  Verify the number of pins and style of plug for best match of your CDI.This is an AC CDI.  Most of the newer machines are using AC CDIs. The easiest way to ..

Chinese Starter Chain.62 LinksThis Chinese starter chain is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Starter chain description:Fits both top & bottom mount starters 62 linksFlywheel puller tool makes job easierCompatible with 50cc-125cc 4 s..

Chinese Intake Manifold 20mm IDVersion 2Chinese 50cc-110cc intake manifold fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, and mopeds. Check pictures and measurements to verify this one will fit your machine/engine. Measurement on bolt holes are center-to-center.Manifold description:Bolt hole measurement: 45mm [1.77"] to engineBo..

Chinese Timing Cam Chain84 link - 50cc-110cc enginesThis is a timing chain for 50cc-110cc engines.  If you are needing a drive chain this is not the one you are looking for.  This chain is a much smaller chain and is located inside your engine.  Please use specs & pictures to match your chain.TIMING chain details:84 linksPin distance: 6.5mm [.2..

Chinese Timing Chain Tensioner Roller Arm50cc-110cc enginesThis is a timing chain Chain Tensioner Roller Arm for 50cc-110cc engines.  Please use specs & pictures to match your chain.TIMING chain tension arm details:Overall length: 99mm [3.9"]Dowel on end length: 13.85mm [0545"]Dowel on end OD: 10mm [0.395"]Dowel on end ID:  5.1mm [020"]Center h..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version  27This Chinese PZ19 hand choke carburetor is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This carburetor fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Carburetor description:PZ19 w/ hand choke (lever)Intake ID: 19mmA..

Starter One Way Drive Clutch Gear50cc to 125cc EngineEngine Starter Clutch Gear - This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Gear details:41 tooth gearID of center hole: 19.5mm [.77"] Overall G..

Chinese ATV Front Sprocket - 428-13TThis front sprocket is used on the Chinese 50cc-125cc engines.  This sprocket has 13T and is compatible with the 428 chain ONLY.  Sprocket details:#428 chain used on ATVs usually with a 7 inch rear wheel or smaller13TFits 17mm - shaftUses retainer with bolts [not included]will NOT fit Kazuma ATVs [90cc & unde..

Chinese Engine Oil FilterThis Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This oil screen fits 50cc - 125cc models.  Filter description:Filter Measurement: 40mm X 45mm approx.Compatible with 50cc-125cc 4 stroke horizontal engines111641  10205A127Known to fit 50cc - 125cc atvs, dirt bikes and m..

Chinese Stator Magneto for ATVs, Dirt-Bikes and Go Karts.Version 3This Chinese stator magneto is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.  The stator recharges the battery while the machine is in use, like an alternator in a car.  This stator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Sta..

Chinese ATV Rim for Taotao ATVs and Go Karts.7x5 - 3 bolt with 10mm bolt holesChinese rim for ATVs and Go Karts that is used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:Overall width: 12.6cm [5"]Overall diameter: 20.0cm [7.875"] Diameter without bead lip: 18..

Chinese ATV Rim for Taotao ATVs and Go Karts.7x5- 3 boltChinese rim for ATVs, used on several makes and models. Please use detailed measurements and pictures to help you get the correct rim for your machine.Rim details:BlackOverall width: 12.6cm [5"]Overall diameter: 20.2cm [7.95"] Diameter without bead lip: 18cm [7"]Center hole diameter: 52mm [2.0..

Chinese Universal 12v Horn for Scooters and Mopeds.This horn fits almost every moped and scooter out there.  It has a bracket attached on the back with 2 different size bolt holes.  Horn details:2 male spade connectorsScrew for grounding 69mm [2.7"] in diameterBracket is 70mm [2.76"] long95-105 dB12v1.5AA049073 A049859DL127YYZX-250-1900210406A2310..

CDI Rubber Saddle MountThis is the rubber piece that holds the CDI in place.  Because it's constantly exposed to the elements, they are prone to failure.  Luckily, they don't cost much to replace.  Buy an extra!Rubber mount specs:Black rubberFits around the 64mm x 37mm cdisAbout one inch wideShipping:Do you need your cdi fast?  If you order before ..

Chinese Carburetor for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 16This Chinese PZ19 cable choke carburetor is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This carburetor fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Carburetor description:PZ19 w/ cable chokeIntake ID: 19mmAir filt..

Chinese Scooter Headlight Dimmer SwitchThis is the OEM switch for the TaoTao ATK125A, Jeep Auto, 4FUN 150 and 4FUN 200 Go Karts.  It fits many makes and models.  Please check pictures and description before ordering.Switch Details:2 position headlamp switch - high beams / low beams3 spade male plugCurved bezel around switchOverall measurements: 25...

Horn Switch Button for Scooters & Go KartsSwitch details:Single function switchPush button momentary horn switch2-spade connector on rearLength: 38.5mm [1.5"]Width: 15.6mm [.62"]Height with button up is about 39mm or 1.5 inches.10923A525  108279  M09704-2YYYL-150-06013   6.000.07950QT-8C-020605   250T-B-020206This switch fits several Taotao sco..

Chinese Clutch Assembly - 110cc-125cc Automatic w/ ReverseVersion 3910Clutch assembly fits 110cc-125cc Taotao atvs and Go Karts.  May fits other makes and models too.  Please use pictures and descriptions to determine fit. Clutch details:Perforated caseThe smallest gear has 6 splines.The 2nd gear has 18 teeth The 3rd gear has 17 teethThe outside ca..

Chinese Clutch Assembly - Version 27 - Tao Tao ATA125D Version 27Clutch assembly (#27) is the replacement clutch for several Taotao ATVs and dirt bikes.  Also fits other 110cc-125cc full-automatic units.Clutch details:Solid caseThe smallest gear has 6 splines.The outside case has 16 tabs and a large snap ring that hold it all together.ID: 15mm peak..

Chinese Brake Pad Set for Go KartThis Chinese brake pad set is the replacement rear pads for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These brake pads fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.  Brake pads description:Overall length of pad: 45.2mm (1.77")Overall width of pad: 41.2mm (1.57")Mounting holes: 2..

Chinese Engine Cap Set for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This Chinese engine / stator cover plug set is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. These caps fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Engine housing plugs description:Caps screw into side/top of the engine c..

Chinese Fuel PetcockVersion 8This Chinese fuel petcock replaces the gas shut off valve for many 4-stroke Chinese  ATVs, Dirt Bikes, & Go Karts. This valve fits 50cc, 70cc, 90cc, 100cc, 110cc, 150cc models.  Petcock description:Overall length: 63mm [2.48"]Nipple OD: 6.65mm [.26"]Nipple ID: 3.75mm [.15"]2 positionCompatible with 50cc-150cc 4 stro..

Chinese Disc Brake Pad Set for Go KartsVersion 32This Chinese brake pad set is the replacement front pad for many Chinese Go Karts. These brake pads fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.  Known to replace Goldfren #179. Larger pad details:Overall width: 74mm (2.9")Thickness: 7mm [.275"]Mounting hole distance: 57.5mm (2.26")O..

Chinese Rear Brake Master CylinderGo Kart - Version 3This Chinese rear brake master cylinder is the replacement part for many Chinese Go Karts. This master cylinder fits many 50cc, 90cc, 110cc, and 150cc models.  Also known to fit some 250cc Go Karts.Note:  Mounting hardware no longer comes with the master cylinder.  We do have them listed separate..

Front Wheel Hub for Chinese Go Kart.Version 42This front wheel hub was used on several makes and models of Chinese Go Karts. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:(4) M6 x 1.0 bolt holesMounting hole distance: 35mm [1.4"] cen..

Chinese Rear Disc Brake Caliper with Parking Brake for Go KartVersion 32This rear disc brake caliper fits many Chinese Go Karts and dune buggies.  Please use specs and pictures to best identify the caliper you are needing for your machine.Caliper details:Includes bracketMounting Holes: 95mm [3.75"] center-to-center apartOverall length: 125mm [4.93"..

Chinese Go Kart Kill Safety SwitchVersion 19This Chinese safety kill switch fits many models of Go Karts including the Taotao GK110, ATK125A and the 4FUN. Kill switch description:24mm x 16mm oval Red button that pushes down and stays3 prong male plugDouble triangle on red108276Shipping details:Item(s) will be shipped within 1 business days once you..

Chinese Headlight Switch Button for Go Karts and ScootersThis is the OEM headlight switch for the TaoTao ATK125A and GK110 Go Karts.  This switch is also used on some scooters.Headlight switch details:6-spade connection3 position switchSwitch raises up in the back108278  50QT-8C-020601250T-B-020204This light control switch fits several Taotao Go K..

Chinese Ignition Key Switch Version 43This Chinese key switch fits several makes and models of Chinese Go Karts. May also fit ATVs.  Check specs and detailed pictures to best match your switch.Switch details:Wiring harness is 4 inches long.  5-wire with 5 spade connector.  2 position switch plug momentary OFF-ON.  Barrel of switch is .92" diameter...

Ignition Coil with 90° Metal Spark Plug CapThis ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Ignition coil description:Overall length: 46cm [18"]90° metal cap2 prong - green and black terminalsBlack is neutralGreen is input from your cdi101008  12910A16212Fits the Coleman AT110 Husky, A..

Ignition Coil with 90° Metal Spark Plug Cap - 25 Inches LongThis ignition coil is a little longer than our standard version 41.  If you need another seven inches of reach, this should solve your problem  This ignition coil is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters.   Please look at pictures and descr..

5-Wire Gear Shift Indicator Sensor / Neutral Safety SwitchThis gear shift indicator is compatible with ATVs and dirt bikes with 5 position engines. Use detail pictures & measurements for matching.  Indicator details:Overall length: 38cm [15"]5 wires6 prong female plug - top middle emptyWire length: 33cm [13"]Indicator has 5 brass spots - 3 of w..

Chinese Engine Oil PumpThis Chinese oil pump is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This pump fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc horizontal engine models.  Pump description:Overall width: 46.62mm (1.85")Overall length: 73.5mm (2.9")Mounting holes distance: 55mm [2.165"]Compatible with..

Rear Bearing Hub for Chinese Go KartThis bearing hub goes on the rear of some Go Karts.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  We also have this part available without the bearing.Hub details:3 mounting holesMounting holes are 67mm [2...

Rear Bearing Hub for Chinese Go KartThis bearing hub goes on the rear of some Go Karts.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesMounting holes are 67mm [2.6"] apartMounting holes are approximately 10mm [.39"]Ce..

 Rear Bearing Hub for Chinese Go KartThis bearing hub goes on the rear of some Go Karts.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.  Hub details:Three mounting holesMounting holes are 67mm [2.6"] apartMounting holes are approximately 10mm [..

Chinese ATV Rear Sprocket - 428-40TThis rear sprocket is used on the Chinese 125cc-250cc engines.  This sprocket has 40T and is compatible with the 428 chain ONLY.  Fits all Taotao 200cc and 250cc ATVs. Sprocket details:#428 chain 40 TeethCenter hole diameter: 36mm [1.42"](6) 8mm x 1.25 threaded bolt holes for mountingMounting holes distance: 28mm ..

Rear Sprocket Hub for Chinese 110cc, 150cc and 250cc ATVs This rear Sprocket hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:6 mounting holesDistance between holes: 28mm [1.1"] c..

Rear Sprocket Hub for Taotao ATVsThis hub is used on several makes and models of Chinese ATVs.  It attaches the rear sprocket or brake disc to the rear axle.  The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:Bolt hole distance: 47mm [1...

Rear Wheel Hub for Chinese ATV or Go KartVersion 49This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 69mm [2.7"] center-to-c..

Rear Wheel Hub for Chinese ATV or Go KartVersion 48This rear wheel hub is used on several makes and models of Chinese ATVs. The best way to insure you are ordering the correct part is to use our detail pictures and measurements.  Please be sure to check both before ordering.Hub details:3 mounting holesDistance between holes: 78mm [3.06"] center to ..

Spark plug for Chinese ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.This NGK (4629) C7HSA spark plug is the replacement part for many 4-stroke Chinese  atvs, dirt bikes, Go Karts and scooters.  It is, by far, the most popular plug for Chinese models.  This plug fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc, and 150cc models.NGK is the "Gold Standard..

Chinese Starter for ATVs, Scooters-Mopeds, Dirt-Bikes and Go Karts.Version 1This Chinese 3-bolt starter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This starter fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  This version will NOT fit the Kazuma Meerkat.  Starter description:Top Mount 3-bolt12..

Starter Relay Solenoid for Chinese EnginesVersion 21This starter relay solenoid fits many Chinese models of ATVs, scooters, mopeds, dirt bikes, and go karts.  Solenoid fits many engine sizes including, but not limited to, 150cc, 200cc, and 250cc.Starter relay solenoid description:2 wire male plug [see picture]8 inch pigtailCompatible with 50cc to 2..

Chinese 4-Pin Voltage Regulator.Version 15This Chinese voltage regulator is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This regulator fits 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Voltage regulator description:4-pin [plug as pictured]Overall length: 67mm [2.6"]Length of metal area: 55mm [2.1"]..