Transmission Clutches

Motorcycle Engine Gear Shift Fork for 100cc Engine.Overall Length: 95mm [3.74"] includes bolt headDiameter of drum: 34mm [1.34"]Star diameter: 32.1mm2 oblong holes on star end2 oblong holes and one smaller oblong hole on opposite endID of forks: 26.33mmThreaded end shaft OD: 13mm..

Chinese Shift ShaftVersion 2Shift shaft specs:Length 260mm [10.25"]Diameter of splines long end: 11.33mm [.446"]Diameter of splines short end 11.25mm [.442]Length of long end: aprox 6.55"Length of short end: aprox 2.65"Length of arm 1: 56.8mm {2.24"]Length of arm 2: 142mm [5.6"]Length of arm 3: 84.3mm [3.3"]10410A2314   600855Known to fit many Chin..

Motorcycle Engine Gear Shift Fork for LF110/125/140/150cc Engine.Overall Length: 96mm [3.78"] includes bolt headDiameter of drum: 34mm [1.34"]This shift fork is for 4 speed manuals transmissiionsThe prongs under star are 4.5mm tallStar width: 37.25mmHole that goes thru drum has circle on one side and half circle on other side.Width of fork closest ..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:SilverRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCompatib..

Chinese Clutch Top Cover for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese clutch top cover is the replacement part for many 4-stroke Chinese  dirt bikes, Go Karts and ATVs. Cover description:SilverRight sideOverall length: 24cm [9.45"]Overall width:  16cm [6.35"]Cover has indented area for clutch cover plate [oval]Oval plate mounting hole d..

Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This black Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

BLACK Right Side Engine Cover for ATVs, Dirt-Bikes and Go Karts.This Chinese engine cover is the replacement part for many 110cc and 125cc 4-stroke Chinese dirt bikes, Go Karts and ATVs.  We also have the version with the kick start lever hole.Cover description:BlackRight hand crankcase coverOverall length: 24cm [9.45"]Center hole in clutch areaCom..

Chinese Shift ShaftVersion 1Shift shaft specs:Length 197mm [7.75"]Diameter of splined end: 11.25mm [.44"]Length of arm 1: 142.7mm {5.62"]Length of arm 2: 84.3mm [3.3"]Known to fit many Chinese manufacturers including Lifan and Roketa.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the ite..

Chinese Engine Cover RH - 125cc Engine - Taotao ATD125A, ATD125C, ATD125E MotorcycleThis Chinese engine right side cover is the replacement part for 125cc dirt bikes.Cover description:Right sideOverall size is approx 9.5" x 6.8"8 mounting holes around outside70mm [2.8"] opening with (3) threaded holes17mm large threaded opening13.7mm opening in cor..

Chinese ATV Reverse Gear Box for Loncin, Jianshe, Lifan, Zongshen - 150cc 200cc 250cc - with Foot ControlGear box details:Foot controlled gear box6-spline female 19.7mm [.775"] input 20mm [.79"] output shaft with universal jointU-joint has 21-spline female 21.8mm [.86"] yoke connectionMounting bracket holes are 163mm [6.4"] center-to-center apart(3..

Go Kart Gear Shift Foot / Cable EqualizerThis metal equalizer replaces the original plastic ones that came out on the karts originally.  Used on many Go Karts with 150cc engines.Description:Outside diameter: 81.7mm [3.22"]Slotted around outside for cablesHammerhead / Manco #14750Trailmaster #40002-300GK Known to fit American Sportworks, Hammerhead,..

Chinese Front Drive Variator Clutch Roller Kit - 6gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm6 gramShipping details:Item(s) will be shipped within 1 business days once you finished your ..

Chinese Front Drive Variator Clutch Roller Kit - 7gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm7 gramShipping details:Item(s) will be shipped within 1 business days once you finished your ..

Chinese Front Drive Variator Clutch Roller Kit - 9gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm10 gramShipping details:Item(s) will be shipped within 1 business days once you finished your..

Chinese Front Drive Variator Clutch Roller Kit - 10gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm10 gramShipping details:Item(s) will be shipped within 1 business days once you finished you..

Chinese Front Drive Variator Clutch Roller Kit - 11gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm11 gramShipping details:Item(s) will be shipped within 1 business days once you finished you..

Chinese Front Drive Variator Clutch Roller Kit - 12gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm12 gramShipping details:Item(s) will be shipped within 1 business days once you finished you..

Chinese Front Drive Variator Clutch Roller Kit - 4gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm4 gramShipping details:Item(s) will be shipped within 1 business days once you finished your ..

Chinese Front Drive Variator Clutch Roller Kit - 5gGY6 50cc [QMB139] - CVT - AutoChinese complete variator roller weight kit for the CVT fully automatic 50cc engines on many makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm5 gramShipping details:Item(s) will be shipped within 1 business days once you finished your ..

Chinese Front Drive Variator Clutch Roller Kit - 5gGY6 50cc [QMB139] - CVT - AutoChinese complete variator slider weight kit for the CVT fully automatic 50cc engines on several makes and models of scooters.Roller kit details:Set of 6Diameter: 16mm  Width: 13mm5 gramFits many make and models of scooters with 50cc 139QMB engines including BMS Apache ..

Chinese Front Drive Variator Clutch Slider Weight Kit - 6gGY6 50cc [QMB139] - CVT - AutoChinese complete variator slider weight kit for the CVT fully automatic 50cc engines on several makes and models of scooters.Roller kit details:Set of 6Slider weightsDiameter: 16mm  Width: 13mm6 gramFits many make and models of scooters with 50cc 139QMB engines ..

Chinese Front Drive Variator Clutch Slider Weight Kit - 7gGY6 50cc [QMB139] - CVT - AutoChinese complete variator slider weight kit for the CVT fully automatic 50cc engines on several makes and models of scooters.Roller kit details:Set of 6Slider weightsDiameter: 16mm  Width: 13mm7 gramFits many make and models of scooters with 50cc 139QMB engines ..

Chinese Front Drive Variator Clutch Slider Weight Kit - 8gGY6 50cc [QMB139] - CVT - AutoChinese complete variator slider weight kit for the CVT fully automatic 50cc engines on several makes and models of scooters.Roller kit details:Set of 6Slider weightsDiameter: 16mm  Width: 13mm8 gramFits many make and models of scooters with 50cc 139QMB engines ..

Chinese Front Drive Variator Clutch 10 Gram Roller KitGY6 125cc 150cc 170cc Chinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Genuine KOSO brandRoller diameter: 18mmRoller width: 14mm  10 gramsShipping d..

Chinese Front Drive Variator Clutch 11 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Roller diameter: 18mmRoller width: 14mm11 gramsShipping details:Item(s) will b..

Chinese Front Drive Variator Clutch 12 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Roller diameter: 18mmRoller width: 14mm12 gramsShipping details:Item(s) will b..

Chinese Front Drive Variator Clutch 14 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc, 150cc and 170cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6RoundDiameter: 18mm  Width: 14mm14 gramsShipping details:Item(s) will be..

Chinese Front Drive Variator Clutch 15 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Genuine KOSO brandRoller diameter: 18mmRoller width: 14mm15 gramsShipping deta..

Chinese Front Drive Variator Clutch 16 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Genuine KOSO brandRoller diameter: 18mmRoller width: 14mm16 gramsShipping deta..

Chinese Front Drive Variator Clutch 17 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc, 150cc and 170cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6RoundDiameter: 18mm  Width: 14mm17 gramsGenuine KOSOShipping details:Ite..

Chinese Front Drive Variator Clutch 18 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc, 150cc and 170cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6RoundDiameter: 18mm  Width: 14mm18 gramsGenuine KOSOShipping details:Ite..

Chinese Front Drive Variator Clutch 8 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Genuine KOSO brandRoller diameter: 18mmRoller width: 14mm8 gramsShipping details..

Chinese Front Drive Variator Clutch 9 Gram Roller KitGY6 125cc 150cc 170ccChinese complete variator roller weight kit for the CVT fully automatic 125cc and  150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller Kit details:Set of 6Genuine KOSO brandRoller diameter: 18mm  Roller width: 14mm9 gramsShipping deta..

Chinese Front Drive Variator Clutch 10 Gram Slider Weight KitGY6 125cc 150cc 170ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesSlider diameter: 18mmS..

Chinese Front Drive Variator Clutch 12 Gram Slider Weight KitHigh Performance - GY6 125cc 150ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesRoller di..

Chinese Front Drive Variator Clutch 13 Gram Slider Weight KitGY6 125cc 150cc 170ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesSlider diameter: 18mmS..

Chinese Front Drive Variator Clutch 14 Gram Slider Weight KitGY6 125cc 150cc 170ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesSlider diameter: 18mmS..

Chinese Front Drive Variator Clutch 18 Gram Slider Weight KitGY6 125cc 150cc 170ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesSlider diameter: 18mmS..

Chinese Front Drive Variator Clutch 8 Gram Slider Weight KitGY6 125cc 150cc 170ccCVT - AutoChinese high performance variator slider weight kit for the CVT fully automatic 125cc and 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Roller kit details:Set of 6Weights are beveled - flat sidesSlider diameter: 18mmSl..

20x12 Variator Roller Weight Kit - Yamaha Linhai 250cc 260cc 300cc - 10 gramsCVT - AutoHigh performance variator roller weight kit for the CVT fully automatic 250cc-300cc Yamaha Linhai engines found on several makes and models of atvs and scooters.Roller kit details:Set of 8Weights are roundDiameter: 20mmWidth: 12mm10 gramVOG Fits many makes and mo..

20x12 Variator Roller Weight Kit - Yamaha Linhai 250cc 260cc 300cc - 8 gramsCVT - AutoHigh performance variator roller weight kit for the CVT fully automatic 250cc-300cc Yamaha Linhai engines found on several makes and models of atvs and scooters.Roller kit details:Set of 8Weights are roundDiameter: 20mmWidth: 12mm8 gramVOG Fits many makes and mode..

20x12 Variator Roller Weight Kit - Yamaha Linhai 250cc 260cc 300cc - 9 gramsCVT - AutoHigh performance variator roller weight kit for the CVT fully automatic 250cc-300cc Yamaha Linhai engines found on several makes and models of atvs and scooters.Roller kit details:Set of 8Weights are roundDiameter: 20mmWidth: 12mm9 gramVOG Fits many makes and mode..

Chinese Transmission Gear for CF250cc Water Cooled Engines Gear details:54 teeth on large gear13 teeth on small gear9mm x 33mm shaftFits CF250 CH250 CN250 water cooled engines..

3-Piece Chinese Clutch Disk Plate SetThis clutch disc set fits a wide variety of atvs, dirt bikes, etc. with automatic clutches.  The plate with the external teeth has friction material on both sides.  The two plates with internal teeth, have friction material only on one side.Specs:OD of plate with external teeth: 96mm [3.78"] Does not include tee..

Kick Starter Ratchet Gear for 50cc ScootersRatchet gear used with 50cc 4-Stroke 139QMB EnginesGear details:3-armed gear with ratcheted teethID: 13.5mm [.53"](6) Ratchet teethQMB139 139QMB ..

Chinese Clutch Top Cover for ATVs, Dirt-Bikes & Go Karts.This Chinese clutch top cover is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts. This fits the semi-auto clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover description:Clutch topMounting hole distance: 42mm [1.65"]Center hole diameter: 10mm [..

Chinese Clutch Top Cover Plate Gasket for ATVs, Scooters, Dirt-Bikes & Go Karts.This Chinese clutch top cover plate gasket is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This gasket fits the semi-auto clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover description:Clutch top plate gask..

Chinese Clutch Top Cover Screws - Set of 4 - 50cc to 125cc Engine.This Chinese clutch top cover screws for the plate cover - replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes and Go Karts.This gasket fits clutch of 50cc, 70cc, 90cc, 100cc, 110cc, and 125cc models.  Cover screws description:Set of 4Compatible with 50cc-125cc ..

Chinese Clutch Gear Shift Pin Bolt - 4mm - 50cc-110ccGear Shift Pin Bolt details:Overall length: 39.4mmEnd measurement: 10mm x 1.50mm x 14.6mm long10mm end has 3.75mm hole in the endEnd measurement:  8mm x 1.25 x 20mm long8mm end has slot - hole located on the smooth area of boltCenter lip thickness: 4mm50-135cc engines..

Chinese Clutch Gear Shift Pin Bolt - 5mm - 50cc-110ccGear Shift Pin Bolt details:Overall length: 40mmEnd measurement: 10mm x 1.50mm x 15mm long10mm end has 3mm hole in the endEnd measurement:  8mm x 1.25 x 20mm long8mm end has slot - hole located on the smooth area of bolt Center lip thickness: 5mm50-135cc engines..

Chinese Clutch Gear Shift Spring - 21mm - 50cc-110ccGear Shift Spring details:OD: 21mmID: 18.4mmHeight: 6.3mm50-135cc engines..

Clutch Lock NutThis is the "pesky" clutch lock nut that causes all the problems when trying to replace your clutch. We have the tool you need to remove this nut but if you have already damaged your lock nut, we have the replacement lock nut with washer too.Lock nut details:Nut ID: 14mmNut OD: 27.85mm [1.10"]Comes with retaining washerRequires spec..

Chinese Clutch Primary Drive Gear with Inner Sleeve - 17 Teeth - 50cc-125ccDrive Gear details:17 Teeth Drive GearWill NOT for 18T drive gearsPopular in 50-125cc semi-auto enginesSome full-autos may use this drive gearInner sleeve includedKnown to fit all Kazuma 100cc & 110cc semi-auto ATVs & dirt bikes. [Falcon, Lacoste, Panda]**MACHINED FO..

Starter Drive Clutch - 3 Sprag - 50cc to 125cc EngineEngine Starter Clutch - 3 sprags is the replacement part that fits 50cc, 70cc, 90cc, 100cc, 110cc, 125cc ATVs, Dirt Bikes.  This E22 cloned engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire,..

Starter Clutch Drive Gear50cc to 125cc EngineEngine Starter Clutch Drive Gear - AKA primary driven gear / clutch counter gear.  This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Drive Gear details:69 ..

Starter One Way Drive Clutch Gear50cc to 125cc EngineEngine Starter Clutch Gear - This engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, Jet Moto, Taotao, Terminator, Wild Fire, Extreme and many more.Starter Clutch Gear details:41 tooth gearID of center hole: 19.5mm [.77"] Overall G..

Chinese Right Hand Clutch Adjusting Cover for Taotao 125cc ATVs.This Chinese RH clutch adjusting cover is the replacement part for the Taotao ATA125A, ATA125G and ATA125H ATVs.Cover description:Overall length: 98mm [3.88"]Overall width:  79mm [3.1"]Chrome finishOval plate mounting hole distance: 85mm [3.35"]Compatible with 125cc engines..

Chinese Right Side Engine Cover for Dirt BikesThis right side engine cover is the replacement part for many 4-stroke Chinese dirt bikes. This cover fits the semi-auto clutch of 90cc, 100cc, 110cc, and 125cc models.  We also have the similar cover without the kick start hole.  Cover description:Overall length: 24cm [9.45"]Overall width:  16cm [6.35"..

Chinese Right Side Engine Cover for Dirt Bikes - BLACKThis right side engine cover is the replacement part for many 4-stroke Chinese dirt bikes. This cover fits the semi-auto clutch of 90cc, 100cc, 110cc, and 125cc models.  We also have the similar cover without the kick start hole.  Cover description:Overall length: 24cm [9.45"]Overall width:  16c..

Gear Indicator Lights - Neutral and ReverseGear Indicator set for many makes and models of Chinese Atv's.  Fits a 5/8 inch opening.Light specs:Red and green lamp included2-wire17" pigtail102766Known to fit Tao Tao ATA125D, ATA125F, ATA150G, Bull 150, Cheetah and Rhino 250.Shipping details:Item(s) will be shipped within 1 business days once you fini..

Chinese ATV Starter Clutch AssemblyGY6 250cc EngineEngine Starter Clutch Assembly - GY6 250cc - Dirt Bikes, Scooters. This style engine is identified by the CVT belt cover on the left side of engine. This Honda Elite copied scooter engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi-Bird, J..

Neutral Safety Switch - 200cc, 250c This gear shift indicator is compatible with ATVs and dirt bikes with CG 200cc-250cc engines. Use detail pictures & measurements for matching.Indicator details:Overall length: 45cm [17.75"]6 white wires6 prong plugWire length: 40.6cm [16"]Indicator has 6 brass spotsMounting hole distance: 33mm [1.3"]10023A25 ..

Starter Clutch - 20 Sprag - CG200 CG250 EngineEngine Starter Clutch - 20 sprags is the replacement part that fits CG 150cc 200cc, 250cc ATVs, Dirt Bikes. This vertical style engine with a manual clutch and foot shifter for the gears. This dirt bike engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, R..

Chinese ATV Starter Clutch - 3 Sprag - CG200 CG250 EngineEngine Starter Clutch / Overrunning Starter Bypass / One Way Starter Clutch - Three sprags is the replacement part that fits 150cc, 200cc, 250cc ATVs, Dirt Bikes. This vertical style engine with a manual clutch and foot shifter for the gears. This dirt bike engine commonly used in Roketa, Lif..

Dual Size Clutch Nut Spanner ToolThis specialty tool will make removal of those clutch nuts fast and easy! This dual size tool is especially handy for those steel stamped clutches with the smaller nut. Uses a 1/2 drive extension to attach to your impact wrench or your ratchet.Tool height: 60mm [2.36"]Small end width:  25mm [1"]Large end width: 30mm..

Deep Well Starter Clutch Nut Spanner ToolGY6-150 spanner toolThis specialty tool is for removing the 4 notched nut holding on the starter clutch on the GY6 150cc engine. This nut looks like a clutch nut used on the 50cc-110cc engines, however it is larger style nut. This nut has reverse threads and removes in the clockwise direction.Uses a 1/2 driv..

Chinese Clutch Flange Nut - Hisun Primary and Secondary 16mm x 1.0 This 16mm x 1.0 flange nut works with both the primary and secondary clutches on Hisun 400cc, 500cc and 700cc UTVs.  Known to fit Bennche, Big Muddy, Coleman, HiSun, Massimo, Menards, Supermach, Q-Link and more!  Please compare pictures and measurements...

Chinese Clutch Top Cover for ATVs, Scooters, Dirt-Bikes and Go Karts.This Chinese clutch top cover is the replacement part for many 4-stroke Chinese  dirt bikes, Go Karts and ATVs. This cover is exactly like our version #2, but has an opening for a kick start lever.Cover description:SilverRight sideOpening for kick start leverOverall length: 24cm [..

Gear Shift Lever - Heel ToeVersion 3Shifter description:Overall Length - 22cm [8.7"]Mounting hole diameter - 11mm [.43"] but is adjustableScrew adjustment on mounting holeKnown to fit most semi auto shift engines including 110cc engines with reverse...

Gear Shift LeverVersion 9Shifter description:Overall Length - 13.8cm [5.4"]Peg length - 44mm [ 1.75"]Mounting hole diameter - 10mm [.40"] but is adjustableScrew adjustment on mounting holeKnown to fit most shift engines including CG 200cc engines.Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we..

Chinese ATV GearboxChinese E22 engine gearbox is compatible with Yamoto 50-110cc with an output shaft drive.  May also fit some Yamaha shaft drive models.  Will not fit the 200cc-250cc.Gearbox details:Overall case length length including shaft: 13.4cm [5.27"]Overall width at widest point: 14.37cm [5.65"]ID of shaft hole at widest point: 17mm [.67"]..

Gear for GY6 Reverse Gear BoxThis is the external gear used on the GY6 reverse gear boxes found on Go Karts and buggies.  If you have a busted gear, why buy the whole box?  Please check pictures and description before ordering to determine fit.Gear details:16 tooth  Outside diameter: 88mm [3.46"]Thickness: 8.8mm [3.34"](6) 8.3mm bolt holesBolt hole..

Gear Display Indicator - Neutral, Reverse, 1,2,3Semi Auto - 110cc 125ccDetails:Six prong plug5 wires in plug1 black wire with push pinWire colors: pink, yellow/red, blue/red, green/black, green/redDisplay shows 1, 2, 3, R, NSemi AutoFits many makes and models of Chinese Atv's.  Fits a 5/8 inch opening...

Chinese Gear Shift Lever - Forward / Reverse - Go Kart, Dune BuggyVersion 07Universal bolt-to-frame gear shifter.  Shifter description:Curved shift lever is approximately 7" long from pivot pointBall end cable goes thru cylinder and attaches to bottom of shifter8mm bolt hole on front flange 5mm threaded hole on front flange8mm bolt hole on side fla..

Chinese Gear Shift Lever - Forward / Reverse - Go Kart, Dune BuggyVersion 120Universal bolt-to-frame gear shifter.  Shifter description:Curved shift lever is approximately 6.5" long from pivot pointBall end cable goes thru cylinder and attaches to bottom of shifterHeavy spring about 1.5" long in cylinder8mm bolt hole on front flange 8mm bolt hole o..

Chinese Gear Shift Lever - Forward / Reverse - Go Kart, Dune BuggyVersion 288Universal bolt-to-frame gear shifter.  Shifter description:Curved shift lever is approximately 6.5" long from pivot pointBall end cable goes thru cylinder and attaches to bottom of shifter8mm bolt hole on front flange 8mm bolt hole on side flangeIncludes bootDoes not inclu..

Gear Shift Boot for Go Kart Gear Shifter AssembliesThis is the gear shift boot for the frame mounted gear shift lever assemblies.  Please check pictures and description before ordering.  Boot details:Black rubberOverall dimensions: 5" L x 2.5" W x 3.5" HOpening for handle is approximately 3.5" long with larger openings at both endsOpen at the botto..

Nylon Bushing Set for Variator ClutchGY6 125cc 150cc 170ccBushin kit details:Set of 3Nylon"U" shaped8.7mm thickGrooved on the outside edgeShipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be offered for you. Professional Safety Packaging and Fast Delive..

Chinese Final Gear - 40 Tooth - GY6 125cc 150ccGear details:19 inner splines40 tooth GearGear is 75.5mm OD [2.97"]Gear is 19.6mm ID [.77"] valley-to-valleyThickness is 20mm [.78"]GY6 125cc 150cc QMI152 QMI157 QMJ152 QMJ157 Please look at pictures and description before ordering.  ..

Chinese Front Drive Variator Clutch AssemblyGY6 125cc 150cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diameter: 11.5c..

Chinese Front Drive Variator Clutch AssemblyHigh Performance - GY6 125cc 150ccCVT - AutoChinese high performance variator clutch assembly for the CVT fully automatic 125cc, 150cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:10g weightsVariator face diameter:  11.4cm [4.50"]Variator center hole di..

Chinese Clutch Side Cover - Full Auto - GY6 125cc, 150cc Long Case Engines.This Chinese clutch cover is the replacement part for many 4-stroke Chinese Dirt Bikes, Go Karts and ATVs. This cover fits the GY6 125cc and 150cc with 10 bolt long case.  Cover description:Left sideOverall length: 46cm [18.25"] not including breather areaOverall width:  17c..

Kick Start Gear Shaft Assembly for GY6 125cc 150cc Scooters Version 5This is the shaft that the kick starter pedal mounts to.  Kick start shaft gear details.16 teeth on gear32 splines on shaftLength is approximately 129mm [5.08"]Diameter of gear: 94.6mm [3.73"] at widest spotShaft diameter near gear: 16mm [.62"]Shaft diameter near splines: 14mm [.5..

Chinese Kick Start Gear Shaft Assy for GY6 125cc 150cc EnginesThis is the shaft that the kick start pedal mounts to.  Kick start shaft gear details.37 teeth on gearDiameter of gear: 102mm [4.0"]Diameter of shaft: 12mm [.47"]Length of shaft: 98mm [3.86"] measured end to end thru gear13 splines on shaftShaft diameter at splines: 33.6mm [1.3"]12635A14..

Chinese Clutch Side Cover - Full Auto - GY6 125cc, 150cc Short Case Engines.This Chinese clutch cover is the replacement part for many 4-stroke Chinese  Dirt Bikes, Go Karts and ATVs. This cover fits the GY6 125cc and 150cc with 8 bolt short case.  Cover description:Overall length: 41.3cm [16.25"] not including breather areaOverall width:  17cm [6...

Chinese Starter Clutch AssemblyGY6 125cc 150cc EngineEngine Starter Clutch Assembly - GY6 125cc and 150cc ATVs, Dirt Bikes, Scooters. This style engine is identified by the CVT belt cover on the left side of engine. This air cooled scooter engine commonly used in Roketa, Lifan, SunL, Yamoto, Eagle, Baja, Tank Sports, BMX, Loncin, Hensim, Redcat, Hi..

Reverse Gearbox GY6 150cc ATV, Go Kart QuadGearbox details:16 tooth large gear - 88.35mm OD6 bolts hold on the gear.  19 splines on shaft opening - 19.75mm ID3 mounting studs with nuts - center to center distance: 42mmAdditional 2 studs coming from case - center to center distance: 48mmShift rod - Approx. length: 48mmSee pictures for closer details..

Chinese Starter Clutch Lock NutVersion 2This starter clutch nut is used on the GY6 150cc engine.  It may require a special tool to remove from the engine to avoid damaging the nut.  Please use the measurements and pictures to help you match the parts you are needing.Lock nut details:ID: 21mm [.82"]OD: 30.9mm [1.22"]4 notchesReverse threadedAlso kno..

Reverse Assembly for GY6 150cc Vehicles with an External Reverse Gearbox.Gearbox details:16 tooth sprocketSprocket OD: 87.4mm [3.43"]Gear shaft ID: 20mm [.787"]Opposite side ID: 16.8mm [.662"]OD of gearbox: 130mm [5.14"](2) studs 91mm [3.58"] apart center-to-center(2) threaded holes in side of caseThis 150cc external reverse gearbox assembly is the..

Chinese Front Drive Variator Clutch AssemblyGY6 170cc 175cc - CVT - AutoChinese complete variator assembly for the CVT fully automatic 170cc and 175cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diame..

Chinese Front Drive Variator Clutch AssemblyGY6 170cc 200cc - CVT - AutoChinese complete variator assembly for the CVT "automatic with reverse" 170cc and 200cc engines used in several makes and models of go karts and some atvs.Variator details:Drive face center hole: 19 teeth [spline shaft]Drive face hole diameter:  15mm [.59"]Drive face diameter: ..

Clutch Side Cover - Full Auto - GY6 50cc Long Case EnginesThis Chinese clutch cover is the replacement part for many 4-stroke Chinese 50cc scooters . This cover fits the GY6 50cc with 10 bolt long case.  Cover description:Left sideOverall length: 46cm [18"] not including breather areaOverall width:  17.4cm [6.84"]15mm [.60"] hole for kickstart9 bol..

Chinese Output Shaft for 50cc ScootersChinese engine output shaft for 50cc scooters.Shaft details:Length: 195mm [7.68"]Splines: 19Threads: 16mmDiameter: 26.9mm at center of shaftDiameter: 16.9 on smooth end of shaftGY6 long case10027A29  102044Fits Taotao Blade 50, Cruiser 50, EVO 50, New Racer 50, Thunder 50 and Zummer 50 scooters, as well as many..

Chinese Front Drive Variator Clutch AssemblyGY6 50cc [QMB139] - CVT - AutoChinese complete variator assembly for the CVT fully automatic 50cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Variator details:Drive face is plastic with a notch/tab metal gear for the spline shaftDrive face center hole: 26 teeth [spline..

Chinese Front Drive Variator Clutch AssemblyGY6 50cc [QMB139] - CVT - AutoHIGH PERFORMANCEChinese complete high performance variator assembly for the CVT fully automatic 50cc engines on several makes and models of scooters.Variator details:Variator face OD: 8.9cm [3.5"]Variator face ID: 20mm [.79"]Roller width: 13mm [.5"]Roller OD: 16mm [.63"]Rolle..

Chinese Front Drive Variator Face GearGY6 50cc [QMB139] - CVT - AutoChinese drive face gear for the CVT fully automatic 50cc engines on several makes and models of scooters, mopeds, go karts, and some ATVs.Gear details:OD of gear: 11.4cm [4.5"]62 Tooth [outside]Drive face center hole: 26 teeth [spline shaft]Drive face hole diameter:  14mm [.55"]Fit..

Chinese Kick Start Gear Shaft Assembly for GY6 50cc EnginesThis is the shaft that the kick start pedal mounts to.  Kick starter shaft gear details.20 teeth on gearLength of shaft is approximately 46mm [1.81"] does not include gearDiameter of gear: 89.8mm [3.53"] at widest spotBushing diameter: 18mm [.70"]Shaft diameter at splines: 13mm [.51"]101836..

8 Spline Kick Start Idle Gear for 50cc ScootersKick start idle shaft gear for GY6 50cc Chinese scooters.  These come in both 7 and 8 spline versions... this is the 8 spline.Idle gear details: Length is aprox 47mm [1.85"]Diameter at big end: 33.4mm [1.32"]Shaft diameter: 10mm [.40"]Includes idle shaft springFits 50cc QMB139 engineFits many 50cc Chin..

Kick Start Return Spring for GY6 50cc ScooterThis is a kick start return spring used on GY6 50cc scooters and mopeds.  It fits many makes and models.  Please look at pictures and description before ordering.Spring specs:Approximate OD: 62mm [2.45"]Approximate ID: 45mm [1.76"]Hooks on both ends101359Fits Tao Tao Blade 50, Cruiser 50, EVO 50, Jet 50,..

Chinese Output Shaft for 50cc ScootersChinese engine output shaft for many makes and models of 50cc scooters.Shaft details:Overall length: 127mm [5"]19 splines16mm threadsDiameter of shaft at the thickest point: 27mm [1.06"]Diameter of shaft at smooth end" 17mm [.67"]includes snap ringGY6 50cc short case10007A17  102224 Fits Taotao ATM50A/A1, CY50A..