Hisun 500cc UTV Parts List

..

Chinese CVT Drive BeltChinese CVT drive belt fits the HiSun 500cc UTV ATV.Belt description:CVT [-Continuous Variable Transmission-]911.5-31.5-28 Fits Hisun 500ccLength: 911.5mm / 35.886"Width: 31.5mm / 1.240"Known to fit:Bennche Bighorn 500Excalibur UTV 500Hisun 500Massimo Alligator 500Massimo MSU500Menards Yardsport YS500Qlink Frontrunner 500Super..

Chinese Clutch Flange Nut - Hisun Primary and Secondary 16mm x 1.0 This 16mm x 1.0 flange nut works with both the primary and secondary clutches on Hisun 400cc, 500cc and 700cc UTVs.  Known to fit Bennche, Big Muddy, Coleman, HiSun, Massimo, Menards, Supermach, Q-Link and more!  Please compare pictures and measurements...

Brake Master Cylinder / Brake Pump for HiSun, Bennche, MenardsChinese UTV Brake Master Cylinder / Brake Pump for Hisun 500cc 700cc and 800cc.  Used on both EFI and carbureted engines.  This does not fit the new bench seat HiSuns, 2015 and newer.  Mounting holes - center to center - 45mm (1 3/4")Length - 168mm (6 5/8") includes bracket but no piston..

Gates CVT Drive Belt for Bennche, Kymco and YamahaThis CVT drive belt fits Bennche, Kymco and Yamaha UTVs and Side-by-Sides. Belt description:CVT [-Continuous Variable Transmission-]Napa G-Force - 29G3596 -  Standard Version of 29C3596Bennche, Kymco and Yamaha UTVs and Side by SidesReplaces Bennche BHXTX2241Replaces Carlisle UA422, UA461Replaces Da..

Oil Drain Cap and O-ring Kit - Hisun 250 500 700 750This Chinese oil filter is the replacement part for many 4-stroke Chinese  ATVs, Dirt Bikes, Go Karts and Scooters. This fits GY6 50cc - 150cc models.  Kit description:Cap OD: 42mm [1.65"]Threads are 30-32mmUses a 17mm socket or wrenchIncludes o-ringKnown to fit the Hisun family of UTVs including ..

Chinese Pull Choke Cable for Hisun 400cc 500cc and 700cc UTVsVersion 18This Chinese choke cable is the replacement part for Hisun 400cc, 500cc and 700cc UTVs.  Fits many of the other makes and models manufactured by Hisun. Cable description:Length: 93" About 1 1/2" of throw3mm cylinder on metal curved endKnob on other endKnob end also has a plastic..

Stator Magneto Flywheel - Hisun 500cc 700cc ATV UTVChinese stator magneto flywheel is for carbureted 500cc and 700cc engines made by Hisun.  The Chinese sometimes refer to these as "magnetic motor rotors".   Please use the measurements and pictures to match your part.Flywheel description:Overall height: 47mm [1.84"]Outside diameter: 143mm [5.64"] d..

Chinese Ignition Key Switch Version 52This Chinese key switch fits several makes and models of UTV's. May also fit ATVs.  Check specs and detailed pictures to best match your switch.Switch details:3 position switch  OFF - ON - Momentary4-wire, 4-pin plugWiring harness is aprox 4" longFits a 1" holeComes with 2 keysKnown to fit HiSun 400cc, 500cc, 7..

Chinese Parking Brake Cable - 64"Version 25This parking brake cable is used on Hisun 500cc and 700cc UTVs.  Use the specs below to best match your  cable.Brake cable details:Overall length: 162cm [64"]Known to fit Bennche, Big Muddy, Coleman, Cub Cadet, HiSun, Massimo, Menards, QLink, Yardsports and more.Shipping details:Item(s) will be shipped wit..

3-Prong Hand Held Winch Controller for many UTVsController specs:3-Prong12 Foot CordIN / OUT Switch with Light"Runva" Fits Bennche, HiSun, Massimo, Menards Yardsport, Supermach, Q-link and many more!Shipping details:Item(s) will be shipped within 1 business days once you finished your payment. Once we ship the item(s) out, tracking number will be ..

Runva 3-Prong Hand Held Winch Controller and Wiring Harness for UTVs.This winch controller is commonly found on the Hisun family of UTVs.  This kit includes the wiring harness that the hand control plugs into and connects to the UTV body.  Kit details:3-prong winch controller with male plug12 foot cordIN / OUT Switch with Light"Runva"18" pigtail w..

Runva Winch Solenoid Relay for HiSun UTVsThis solenoid relay is commonly used on the Hisun family of UTVs.  It is used with Runva winches. Solenoid details:Dimensions: 3.24" x 2.37" x 3.72 includes studsFour studs with brass nutsThree small threaded holes in frontIncluded lock washers, nuts and small screwsAttached bracket600A 12VDCFits Bennche, Hi..

Oil Filter Genuine OE Hisun Oil filter for 250cc thru 750cc UTV's & Side by Side'sThis is the original equipment spin-on oil filter for the Hisun 250cc-750cc UTV's.  Hisun in no longer shipping in the pretty red and white boxes, but the product is the same. Filter specs:Diameter: 63.4mm [2.5"]Height: 61.6mm [2.42"]Thread Pitch 3/4"-16UNFWill fi..

Chinese Wheel Lug Stud Bolt and Nut - Hisun 400 500 700 800 Massimo, BenncheThis bolt is used on various sizes and models of Chinese UTVs.  Be sure to use the detailed pictures and measurements to match your part exact.Kit details:Stud is 10mm x 1.25 Stud length including head: 33.3mm [1.3"]Stud splines diameter: 12.44mm [.489"]Chrome capped lug nu..